lilo只能看到两个系统选项！没lilo画面！

xwos

1. slackware7.1下，lilo中有我配置有三个系统（label)选项，运行
# lilo 后显示把三个系统都加载进入了，但重启后只能看到两个系统
的选项。在boot：后输入没有显示出来的系统label可以进入系统。只
是不知为什么显示不出来！
2.  其它Linux(如redhat)的lilo loader都会有显示出来一个画面选
项只要移动光标（上下键）选择就好了，可slackware的lilo是命令模
式的那种还要手动输入系统选项，请问有没有解决办法？

谢谢！

windrose

贴出lilo.conf

xwos

Lilo.conf:

# LILO configuration file
# generated by 'liloconfig'
#
# Start LILO global section
boot = /dev/hda
message = /boot/boot_message.txt
prompt
timeout = 1200
# VESA framebuffer console @ 640x480x64k
vga = 785
# Normal VGA console
# vga = normal
# VESA framebuffer console @ 1024x768x64k
# vga=791
# VESA framebuffer console @ 1024x768x32k
# vga=790
# VESA framebuffer console @ 1024x768x256
# vga=773
# VESA framebuffer console @ 800x600x64k
# vga=788
# VESA framebuffer console @ 800x600x32k
# vga=787
# VESA framebuffer console @ 800x600x256
# vga=771
# VESA framebuffer console @ 640x480x64k
# vga=785
# VESA framebuffer console @ 640x480x32k
# vga=784
# VESA framebuffer console @ 640x480x256
# vga=769
# End LILO global section
# DOS bootable partition config begins
other = /dev/hda1
  label = DOS
  table = /dev/hda
# DOS bootable partition config ends
# Linux bootable partition config begins
image = /vmlinuz
  root = /dev/hda3
  label = Linux
  read-only
# Kernel Compiled
image = /vmlinuz_new
  root = /dev/hda3
  label = Newlinux
  read-only
# Linux bootable partition config ends
请大哥指点一下！
另外第二个问题：
其它Linux(如redhat)的lilo loader都会有显示出来一个画面选
项只要移动光标（上下键）选择就好了，可slackware的lilo是命令模
式的那种还要手动输入系统选项，请问有没有解决办法？
谢谢！！！！

redstar

# LILO configuration file
# generated by 'liloconfig'
#
# Start LILO global section
boot = /dev/hda
#compact        # faster, but won't work on all systems.
prompt
timeout = 50
# VESA framebuffer console @ 1024x768x64k
# vga = 791
# Normal VGA console
vga = normal
# VESA framebuffer console @ 1024x768x64k
# vga=791
# VESA framebuffer console @ 1024x768x32k
# vga=790
# VESA framebuffer console @ 1024x768x256
# vga=773
# VESA framebuffer console @ 800x600x64k
# vga=788
# VESA framebuffer console @ 800x600x32k
# vga=787
# VESA framebuffer console @ 800x600x256
# vga=771
# VESA framebuffer console @ 640x480x64k
# vga=785
# VESA framebuffer console @ 640x480x32k
# vga=784
# VESA framebuffer console @ 640x480x256
# vga=769
# ramdisk = 0     # paranoia setting
# End LILO global section
# Linux bootable partition config begins
  root = /dev/hda3
  read-only # Non-UMSDOS filesystems should be mounted read-only for checking
  menu-title = " Sco-186's Slackware linux "
image = /boot/vmlinuz
  label = slackware
image = /boot/vmlinuz-2.6.5-1.1
  label = try2.6
# Linux bootable partition config ends
# DOS bootable partition config begins
other = /dev/hda1
  label = windows
  table = /dev/hda
# DOS bootable partition config ends

windrose

9.1是有个菜单式的界面可以选择的，但是7.1的就不知道了。

xwos

slackware9.1的Lilo能够显示出三个系统选项吗？
可以的话也许是版本的问题了！
slackware7.1，按tab键后就可以显示出三个系统选项了！
至于显示可选型的lilo画面不知如何处理？

xwos

上当，看到的是boot_message.txt里面的信息，slackware7.1要按
Tab键才能显示系统选项！lilo升级到22.3后就可显示可选型的lilo
画面！