我的mp3 mount不上去。已经解决

YGC

内核没问题的。该选的我都选上了。

1. 
   
2. #mount /dev/sda /mnt/usb
   
3. 
   
4. mount: you must specify the filesystem type

复制代码

1. mount -t vfat /dev/sda
   
2. /mnt/usb
   
3. mount: wrong fs type, bad option, bad superblock on /dev/sda
   
4. 
   
5.        missing codepage or other error
   
6. 
   
7.        In some cases useful info is found in syslog - try
   
8. 
   
9.        dmesg | tail  or so
   

复制代码

dmesg | tail

1. 
   
2. dmesg | tail
   
3. Unable to load NLS charset cp437
   
4. FAT: codepage cp437 not found
   
5. FAT: invalid media value (0x01)
   
6. VFS: Can't find a valid FAT filesystem on dev sda.
   
7. FAT: invalid media value (0x01)
   
8. VFS: Can't find a valid FAT filesystem on dev sda.
   
9. FAT: invalid media value (0x01)
   
10. VFS: Can't find a valid FAT filesystem on dev sda.
    
11. FAT: invalid media value (0x01)
    
12. VFS: Can't find a valid FAT filesystem on dev sda.
    

复制代码

下面是我lspci的输出

1. #lspci
   
2. 0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth AGP
   
3. 0000:00:10.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02)
   
4. 0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth PCI
   
5. 0001:10:17.0 Class ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 03)
   
6. 0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo USB
   
7. 0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo USB
   
8. 0001:10:1a.0 CardBus bridge: Texas Instruments PCI1211
   
9. 0002:24:0b.0 Host bridge: Apple Computer Inc. UniNorth Internal PCI
   
10. 0002:24:0e.0 Class ffff: Apple Computer Inc. UniNorth FireWire (rev ff)
    
11. 0002:24:0f.0 Ethernet controller: Apple Computer Inc. UniNorth GMAC (Sun GEM) (rev 01)

复制代码

下面是#lsusb

1. 
   
2. Bus 002 Device 001: ID 0000:0000
   
3. 
   
4. Bus 001 Device 002: ID 10d6:100
   
5. 0
   
6. Bus 001 Device 001: ID 0000:0000
   

复制代码

dmesg | grep usb

1. usbcore: registered new driver usb-storage
   
2. usbcore: registered new driver usbhid
   
3. drivers/usb/input/hid-core.c: v2.0:USB HID core driver
   
4. drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
   
5. usbcore: registered new driver usbserial_generic
   
6. usbcore: registered new driver usbserial
   
7. drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
   
8. drivers/usb/serial/usb-serial.c: USB Serial support registered for PL-2303
   
9. usbcore: registered new driver pl2303
   
10. drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.12
    
11. usb 1-1: new full speed USB device using ohci_hcd and address 2
    
12. usb-storage: device found at 2
    
13. usb-storage: waiting for device to settle before scanning
    
14. usb-storage: device scan complete
    

复制代码

该支持的都有啦。不知道为什么还会出错。。就连fat 跟vfat的文件系统也编进内核啦。
:help  :help  :help  :help  :help  :help

YGC

重编内核。加入codepage cp437看看。。。

YGC

谢天谢地，可以了。。
郁闷了好久了。。

platinum

Post by YGC
重编内核。加入codepage cp437看看。。。

这样就可以了？
如果是这样解决的，为何要加cp437？
究竟是什么问题？又是如何解决的呢？

YGC

1. Unable to load NLS charset cp437
   
2. FAT: codepage cp437 not found
   
3. FAT: invalid media value (0x01)

复制代码

我是根据出错信息来做的。。
我也不是很清楚

大漠猎人

Post by YGC
重编内核。加入codepage cp437看看。。。

怎么搞的啊,编译的那个文件啊,给点共享好吗?

ssysanny

wrong fs type, bad option, bad superblock on /dev/hda8,
       or too many mounted file systems
很象我的情况,怎么搞,我的NTFT可以,FAT就是这样的提示?我是这样mount的以前没问题,(mount -t vfat /dev/hda8 /mnt/myf.)