Nvidia显卡，LCD，如何设置1280x854分辨率？

Jlxy

麻烦了，我的显卡是Nvidia GF Go5200，驱动已经安装，我的LCD分辨率是1290x854，但是设置里面只有1280x800?，修改xorg.conf也不行~请问如何解决啊~

likaay

具体的步骤：
1、在命令行下输入gtf 1280 854 60
60是分辨率
2、把回车后显示的结果
Modeline "1280x854_60.00"  89.96  1280 1352 1488 1696  854 855 858 884  -HSync +Vsync
复制到/etc/X11/xorg.conf的"Monitor"段下，就像下面的配置文件中添加的一样。
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "LCD Panel 1280x800"
HorizSync 31.5 - 90.0
VertRefresh 60.0 - 60.0
Modeline "1280x854_60.00"  89.96  1280 1352 1488 1696  854 855 858 884  -HSync +Vsync
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "i810"
VendorName "Videocard vendor"
BoardName "Intel 852"
EndSection

3、在每个"Screen"段的字段下添加"1280x854"。
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x854" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x854" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
然后重启系统看看^0^

Jlxy

晕,还是不行啊,是不是我驱动安装的问题啊,我用的是FC4,7667驱动,怎么看驱动是不是已经装好了啊?
附xorg.conf
# Xorg configuration created by system-config-display

Section "ServerLayout"
        Identifier     "single head configuration"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# RgbPath is the location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        FontPath     "unix/:7100"
EndSection

Section "Module"
        Load  "dbe"
        Load  "extmod"
        Load  "fbdevhw"
        Load  "glx"
        Load  "record"
        Load  "freetype"
        Load  "type1"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#        Option        "Xleds"                "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#        Option        "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#        Option        "XkbModel"        "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#        Option        "XkbModel"        "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#        Option        "XkbLayout"        "de"
# or:
#        Option        "XkbLayout"        "de"
#        Option        "XkbVariant"        "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#        Option        "XkbOptions"        "ctrl:swapcaps"
# Or if you just want both to be control, use:
#        Option        "XkbOptions"        "ctrl:nocaps"
#
        Identifier  "Keyboard0"
        Driver      "kbd"
        Option            "XkbModel" "pc105"
        Option            "XkbLayout" "us"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option            "rotocol" "IMPS/2"
        Option            "Device" "/dev/input/mice"
        Option            "ZAxisMapping" "4 5"
        Option            "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "LCD Panel 1280x854"
        HorizSync    53.04 - 53.04
        VertRefresh  60.0 - 60.0
        ModeLine     "1280x854_60.00" 90.0 1280 1352 1488 1696 854 855 858 884 -hsync +vsync
        Option                    "dpms"
EndSection

Section "Device"
        Identifier  "NV AGP"
        Driver      "nvidia"
        VendorName  "Videocard vendor"
        BoardName   "NVIDIA GeForce FX (generic)"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "NV AGP"
        Monitor    "Monitor0"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes    "1280x854" "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "DRI"
        Group        0
        Mode         0666
EndSection

Jlxy

晕~不知道怎么回事~我切换到KDE界面就好了~看来是G的问题~~~晕~~~