LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
查看: 1149|回复: 0

FreeBSD 6.0 学习笔记

[复制链接]
发表于 2006-4-28 23:29:25 | 显示全部楼层 |阅读模式
//FreeBSD 6.0 学习笔记
//整理:钰狼
//QQ:1934365
//信箱:yulangos@163.com
//时间:2006年4月29日

//最小化安装FreeBSD 6.0 操作系统

//如果你的服务器时间不对可以同步网络时间
# ntpdate clepsydra.dec.com

//安装cvsup
# cd /usr/ports/net/cvsup-without-gui
# make install clean

//安装完后,重启系统
# reboot

//更新ports
# cd /usr/share/examples/cvsup
# cvsup -g -L 2 -h cvsup5.freebsd.org ports-supfile
# cvsup -g -L 2 -h cvsup5.freebsd.org standard-supfile

//编辑安装内核
# cd /sys/i386/conf
# cp GENERC MYKERNEL

//编辑内核,按机子配置,把不要的注掉
# ee MYKERNEL
-------------------------------------------------------------------------------
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US ... lconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.429.2.3.2.1 2005/10/28 19:22:41 jhb Exp $

machine i386
#cpu I486_CPU
#cpu I586_CPU
cpu I686_CPU
ident MYKERNEL

# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.

#makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols

options SCHED_ULE # ULE scheduler
#options SCHED_4BSD # 4BSD scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
#options UFS_DIRHASH # Improve performance on big directories
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
#options MSDOSFS # MSDOS Filesystem
#options CD9660 # ISO 9660 Filesystem
#options PROCFS # Process filesystem (requires PSEUDOFS)
#options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options COMPAT_FREEBSD5 # Compatible with FreeBSD5
#options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
#options SYSVSHM # SYSV-style shared memory
#options SYSVMSG # SYSV-style message queues
#options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
options ADAPTIVE_GIANT # Giant mutex is adaptive.

device apic # I/O APIC

# Bus support.
device eisa
device pci

# Floppy drives
#device fdc

# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering

# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device ahd # AHA39320/29320 and onboard AIC79xx devices
#device amd # AMD 53C974 (Tekram DC-390(T))
#device isp # Qlogic family
#device ispfw # Firmware for QLogic HBAs- normally a module
#device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
#device trm # Tekram DC395U/UW/F DC315U adapters

#device adv # Advansys SCSI adapters
#device adw # Advansys wide SCSI adapters
#device aha # Adaptec 154x SCSI adapters
#device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
#device bt # Buslogic/Mylex MultiMaster SCSI adapters

#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50

# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
#device ch # SCSI media changers
device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
#device pass # Passthrough device (direct SCSI access)
#device ses # SCSI Environmental Services (and SAF-TE)

# RAID controllers interfaced to the SCSI subsystem
#device amr # AMI MegaRAID
#device arcmsr # Areca SATA II RAID
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device ciss # Compaq Smart RAID 5*
#device dpt # DPT Smartcache III, IV - See NOTES for options
#device hptmv # Highpoint RocketRAID 182x
#device iir # Intel Integrated RAID
#device ips # IBM (Adaptec) ServeRAID
#device mly # Mylex AcceleRAID/eXtremeRAID
#device twa # 3ware 9000 series PATA/SATA RAID

# RAID controllers
device aac # Adaptec FSA RAID
device aacp # SCSI passthrough for aac (requires CAM)
device ida # Compaq Smart RAID
device mlx # Mylex DAC960 family
device pst # Promise Supertrak SX6000
device twe # 3ware ATA RAID

# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse

device vga # VGA video card driver

device splash # Splash screen and screen saver support

# syscons is the default console driver, resembling an SCO console
device sc

# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor

device agp # support several AGP chipsets

# Power management support (see NOTES for more options)
#device apm
# Add suspend/resume support for the i8254.
device pmtimer

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
#device cbb # cardbus (yenta) bridge
#device pccard # PC Card (16-bit) bus
#device cardbus # CardBus (32-bit) bus

# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports

# Parallel port
#device ppc
#device ppbus # Parallel port bus (required)
#device lpt # Printer
#device plip # TCP/IP over parallel
#device ppi # Parallel port interface device
#device vpo # Requires scbus and da

# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device puc

# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 adapter Gigabit Ethernet Card
device ixgb # Intel PRO/10GbE Ethernet Card
device txp # 3Com 3cR990 (``Typhoon'')
device vx # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device bfe # Broadcom BCM440x 10/100 Ethernet
device bge # Broadcom BCM570xx Gigabit Ethernet
device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device lge # Level 1 LXT1001 gigabit Ethernet
device nge # NatSemi DP83820 gigabit Ethernet
device nve # nVidia nForce MCP on-board Ethernet Networking
#device pcn # AMD Am79C97x PCI 10/100(precedence over 'lnc')
#device re # RealTek 8139C+/8169/8169S/8110S
#device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
device ste # Sundance ST201 (D-Link DFE-550TX)
device ti # Alteon Networks Tigon I/II gigabit Ethernet
device tl # Texas Instruments ThunderLAN
device tx # SMC EtherPower II (83c170 ``EPIC'')
device vge # VIA VT612x gigabit Ethernet
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')

# ISA Ethernet NICs. pccard NICs included.
device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
device ex # Intel EtherExpress Pro/10 and Pro/10+
device ep # Etherlink III based cards
device fe # Fujitsu MB8696x based cards
device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
device lnc # NE2100, NE32-VL Lance Ethernet cards
device sn # SMC's 9000 series of Ethernet chips
device xe # Xircom pccard Ethernet

# ISA devices that use the old ISA shims
#device le

# Wireless NIC cards
device wlan # 802.11 support
device an # Aironet 4500/4800 802.11 wireless NICs.
device awi # BayStack 660 and others
device ral # Ralink Technology RT2500 wireless NICs.
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.

# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)

# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter

# USB support
#device uhci # UHCI PCI->USB interface
#device ohci # OHCI PCI->USB interface
#device ehci # EHCI PCI->USB interface (USB 2.0)
#device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
#device ugen # Generic
#device uhid # "Human Interface Devices"
#device ukbd # Keyboard
#device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da
#device ums # Mouse
#device ural # Ralink Technology RT2500USB wireless NICs
#device urio # Diamond Rio 500 MP3 player
#device uscanner # Scanners
# USB Ethernet, requires miibus
#device aue # ADMtek USB Ethernet
#device axe # ASIX Electronics USB Ethernet
#device cdce # Generic USB over Ethernet
#device cue # CATC USB Ethernet
#device kue # Kawasaki LSI USB Ethernet
#device rue # RealTek RTL8150 USB Ethernet

# FireWire support
device firewire # FireWire bus code
device sbp # SCSI over FireWire (Requires scbus and da)
device fwe # Ethernet over FireWire (non-standard!)
-------------------------------------------------------------------------------

//建立安装内核
# cd /usr/src
# make buildkernel KERNCONF=MYKERNEL
# make installkernel KERNCONF=MYKERNEL

//安装完内核后,重启系统
# reboot

//查看当前版本
# uname -a
FreeBSD yulangos.vicp.net 6.0-RELEASE-p7 FreeBSD 6.0-RELEASE-p7 #0:
Wed Apr 26 16:36:08 CST 2006 yulang@yulangcn.vicp.net:/usr/obj/usr/src/sys/MYKERNEL i386

//安装MySQL50
# cd /usr/ports/databases/mysql50-server
# make WITH_CHARSET=gbk \ //支持gbk厍
? WITH_XCHARSET=all \
? SKIP_DNS_CHECK=yes \ //在加入本机名字时﹐不用做反向解析
? BUILD_OPTIMIZED=yes \ //在编译时优化处理
? BUILD_STATIC=yes \ //把mysqld编译成静态执行版本
? install clean

//配置起动文件
# ee /etc/rc.conf
mysql_enable="YES"

//配置自己的my.cnf文件
# cd /usr/local/share/mysql
# cp my-medium.cnf /etc/my.cnf

//安装apache22
# cd /usr/ports/www/apache22

//编辑Makefile以worker运行apache
# ee Makefile
WITH_MPM?= worker

# make install

//配置起动文件
# ee /etc/rc.conf
apache22_enable="YES"

//配置文件httpd.conf
# cd /usr/local/etc/apache22
# ee httpd.conf
...
ServerAdmin yulangos@163.com //编辑你的Email
...
ServerName 192.168.0.8:80 //你机子的IP
...
DocumentRoot "/usr/local/www" //网页存放目录
...
<Directory "/usr/local/www> //这里也要改成一样
...
Options FollowSymLinks //改成这样
...
DirectoryIndex index.php index.htm index.html //加入index.php
...
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
AddType application/x-httpd-php .php //添加
AddType application/x-httpd-php-source .phps //添加

//安装php5
# cd /usr/ports/lang/php5
# make with_apache22=yes \
? install clean

//安装php-extensions
# make install clean

//安装ZendOptimizer
//到这里下载 http://downloads.zend.com/optimi ... ebsd6.0-i386.tar.gz
//把下载的文件放在/usr/ports/distfiles目录下
//开始安装
# cd /usr/ports/devel/ZendOptimizer
# meke install clean

//在php.ini配置Zend
[Zend]
zend_optimizer.optimization_level=15
zend_extension_manager.optimizer="/usr/local/lib/php/20050922/Optimizer"
zend_extension_manager.optimizer_ts="/usr/local/lib/php/20050922/Optimizer_TS"
zend_extension="/usr/local/lib/php/20050922/ZendExtensionManager.so"
zend_extension_ts="/usr/local/lib/php/20050922/ZendExtensionManager_TS.so"

//安装pure-ftpd
# cd /usr/ports/ftp/pure-ftpd
# make install clean

//添加FTP
# pw adduser ftp

//配置起动文件
# ee /etc/rc.conf
pureftpd_enable="YES"

//配置pure-ftpd.conf文件
# cd /usr/local/etc
# cp pure-ftpd.conf.sample pure-ftpd.conf

//安装phpMyAdmin
# cd /usr/ports/databases/phpmyqdmin
# make install clean

// 安装phpSysInfo
# cd /usr/ports/www/phpSysInfo
# make install clean

//配置config.php
# cd /usr/local/www/data/phpSysInfo
# cp config.php.new config.php
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表