nvidia显卡驱动后，进不了系统

buffee

修改/etc/X11/XF86Config文件如下所示
按照论坛的方法改的，但还是进不了X，不知什么原因




# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
        Identifier     "Default Layout"
        Screen         "Screen0"
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "DevInputMice" "AlwaysCore"
EndSection

Section "Files"
# RgbPath is the location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

        RgbPath      "/usr/X11R6/lib/X11/rgb"
        FontPath     "unix/:7100"
EndSection

Section "Module"
#Load  "dbe"
        Load  "extmod"
        Load  "fbdevhw"
        Load  "glx"
        Load  "record"
        Load  "freetype"
        Load  "type1"
#Load  "dri"
EndSection

Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#        Option        "Xleds"                "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
#        Option        "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#        Option        "XkbModel"        "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#        Option        "XkbModel"        "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#        Option        "XkbLayout"        "de"
# or:
#        Option        "XkbLayout"        "de"
#        Option        "XkbVariant"        "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#        Option        "XkbOptions"        "ctrl:swapcaps"
# Or if you just want both to be control, use:
#        Option        "XkbOptions"        "ctrl:nocaps"
#
        Identifier  "Keyboard0"
        Driver      "keyboard"
        Option            "XkbRules" "xfree86"
        Option            "XkbModel" "pc105"
        Option            "XkbLayout" "us"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option            "rotocol" "IMPS/2"
        Option            "Device" "/dev/psaux"
        Option            "ZAxisMapping" "4 5"
        Option            "Emulate3Buttons" "no"
EndSection

Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
        Identifier  "DevInputMice"
        Driver      "mouse"
        Option            "rotocol" "IMPS/2"
        Option            "Device" "/dev/input/mice"
        Option            "ZAxisMapping" "4 5"
        Option            "Emulate3Buttons" "no"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "F710B"
        DisplaySize  330        250
        HorizSync    30.0 - 71.0
        VertRefresh  50.0 - 160.0
        Option            "dpms"
EndSection

Section "Device"
        Identifier  "Videocard0"
        Driver      "nvidia"
        VendorName  "Videocard vendor"
        BoardName   "NVIDIA GeForce"
        VideoRam    65536
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Videocard0"
        Monitor    "Monitor0"
        DefaultDepth     24
        SubSection "Display"
                Depth     24
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

Section "DRI"
        Group        0
        Mode         0666
EndSection


CPU AMD 2600＋
华擎K8NF4G-SATA2主板
板载显卡 声卡 网卡
Nvidia GeForce 6100 芯片组
SAMSUNG SP0822N 硬盘 80G
LG F710B 显示器
WinXP SP2＋Red Hat 9

buffee

NVIDIA GeForce 6100