|
一个笔记本以前没事用的是suse10.2用这个usb转串口很稳定。但是我前几天换成了ubuntu7.10,原来能用的现在却用不了了
dmesg|tail
[ 1353.284000] ftdi_sio 3-2:1.0: device disconnected
[ 1358.644000] usb 3-2: usbfs: interface 0 claimed by usbfs while 'brltty' sets config #1
[ 1358.688000] usb 3-2: usbfs: process 4034 (brltty) did not claim interface 0 before use
[ 1364.036000] usb 3-2: usbfs: interface 0 claimed by usbfs while 'brltty' sets config #1
[ 1367.096000] usb 3-2: USB disconnect, address 4
[ 1375.688000] usb 3-2: new full speed USB device using uhci_hcd and address 5
[ 1375.880000] usb 3-2: configuration #1 chosen from 1 choice
[ 1375.884000] ftdi_sio 3-2:1.0: FTDI USB Serial Device converter detected
[ 1375.884000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/ftdi_sio.c: Detected FT232BM
[ 1375.884000] usb 3-2: FTDI USB Serial Device converter now attached to ttyUSB0
dmesg|tail
[ 1367.096000] usb 3-2: USB disconnect, address 4
[ 1375.688000] usb 3-2: new full speed USB device using uhci_hcd and address 5
[ 1375.880000] usb 3-2: configuration #1 chosen from 1 choice
[ 1375.884000] ftdi_sio 3-2:1.0: FTDI USB Serial Device converter detected
[ 1375.884000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/serial/ftdi_sio.c: Detected FT232BM
[ 1375.884000] usb 3-2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 1379.612000] usb 3-2: usbfs: interface 0 claimed by ftdi_sio while 'brltty' sets config #1
[ 1379.612000] usb 3-2: usbfs: interface 0 claimed by ftdi_sio while 'brltty' sets config #1
[ 1379.612000] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 1379.612000] ftdi_sio 3-2:1.0: device disconnected
我要用串口调试硬件,这可如何是好 |
|