LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
查看: 1038|回复: 4

还是关于xorg-server的问题

[复制链接]
发表于 2009-1-3 17:16:53 | 显示全部楼层 |阅读模式
我利用元旦放假对lfs又从新编译了一遍,发现还是原来的问题,好像是鼠标和键盘的驱动没有加载,但我都已经编译出来了啊
下面是/var/log/Xorg.0.log的内容


_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/Qdog:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27.8Qdog i686
Current Operating System: Linux Qdog 2.6.27.8Qdog #1 SMP Thu Jan 1 22:25:45 Local time zone must be set--see zic m i686
Build Date: 03 January 2009  03:56:24PM

        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan  3 17:08:16 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "monitor0"
(**) |   |-->Device "video0"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/X11R7/lib/X11/fonts/misc/,/usr/X11R7/lib/X11/fonts/TTF/,/usr/X11R7/lib/X11/fonts/OTF,/usr/X11R7/lib/X11/fonts/Type1/,/usr/X11R7/lib/X11/fonts/100dpi/,/usr/X11R7/lib/X11/fonts/75dpi/.
(**) FontPath set to:
        /usr/X11R7/lib/X11/fonts/misc/,
        /usr/X11R7/lib/X11/fonts/TTF/,
        /usr/X11R7/lib/X11/fonts/OTF,
        /usr/X11R7/lib/X11/fonts/Type1/,
        /usr/X11R7/lib/X11/fonts/100dpi/,
        /usr/X11R7/lib/X11/fonts/75dpi/,
        /usr/X11R7/lib/X11/fonts/misc/,
        /usr/X11R7/lib/X11/fonts/TTF/,
        /usr/X11R7/lib/X11/fonts/OTF,
        /usr/X11R7/lib/X11/fonts/Type1/,
        /usr/X11R7/lib/X11/fonts/100dpi/,
        /usr/X11R7/lib/X11/fonts/75dpi/
(==) ModulePath set to "/usr/X11R7/lib/X11/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse1
(WW) Disabling Keyboard1
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81ca4c0
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 4.1
        X.Org XInput driver : 2.1
        X.Org Server Extension : 1.1
        X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0@1:0:0) unknown vendor (0x1002) unknown chipset (0x5c63) rev 1, Mem @ 0xd8000000/0, 0xd0100000/0, I/O @ 0x00003000/0, BIOS @ 0x????????/131072
(II) System resource ranges:
        [0] -1        0        0xffffffff - 0xffffffff (0x1) MX
        [1] -1        0        0x000f0000 - 0x000fffff (0x10000) MX
        [2] -1        0        0x000c0000 - 0x000effff (0x30000) MX
        [3] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX
        [4] -1        0        0x0000ffff - 0x0000ffff (0x1) IX
        [5] -1        0        0x00000000 - 0x00000000 (0x1) IX
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded by default.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"

(II) Loading /usr/X11R7/lib/X11/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"

(II) Loading /usr/X11R7/lib/X11/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"

(II) Loading /usr/X11R7/lib/X11/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
        compiled for 1.5.3, module version = 2.1.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "glx"

(II) Loading /usr/X11R7/lib/X11/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "dri"

(II) Loading /usr/X11R7/lib/X11/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "ati"

(II) Loading /usr/X11R7/lib/X11/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 6.9.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "radeon"

(II) Loading /usr/X11R7/lib/X11/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 4.3.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 4.1
(II) RADEON: Driver for ATI Radeon chipsets:
        ATI Radeon Mobility X600 (M24) 3150 (PCIE),
        ATI Radeon Mobility X300 (M24) 3152 (PCIE),
        ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
        ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
        ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
        ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
        ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
        ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
        ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
        ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
        ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
        ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
        ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
        ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
        ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
        ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
        ATI Radeon X800PRO (R420) JI (AGP),
        ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
        ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
        ATI Radeon Mobility 9800 (M18) JN (AGP),
        ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
        ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
        ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
        ATI Radeon Mobility M7 LW (AGP),
        ATI Mobility FireGL 7800 M7 LX (AGP),
        ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
        ATI FireGL Mobility 9000 (M9) Ld (AGP),
        ATI Radeon Mobility 9000 (M9) Lf (AGP),
        ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
        ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
        ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
        ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
        ATI Radeon 9800XT NJ (AGP),
        ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
        ATI Radeon Mobility 9600 (M10) NQ (AGP),
        ATI Radeon Mobility 9600 (M11) NR (AGP),
        ATI Radeon Mobility 9600 (M10) NS (AGP),
        ATI FireGL Mobility T2 (M10) NT (AGP),
        ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
        ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
        ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
        ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
        ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
        ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
        ATI Radeon Mobility X300 (M22) 5460 (PCIE),
        ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
        ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
        ATI Radeon X800PRO (R423) UI (PCIE),
        ATI Radeon X800LE (R423) UJ (PCIE),
        ATI Radeon X800SE (R423) UK (PCIE),
        ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
        ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
        ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
        ATI FireGL unknown (R423) UR (PCIE),
        ATI FireGL unknown (R423) UT (PCIE),
        ATI Mobility FireGL V5000 (M26) (PCIE),
        ATI Mobility FireGL V5000 (M26) (PCIE),
        ATI Mobility Radeon X700 XL (M26) (PCIE),
        ATI Mobility Radeon X700 (M26) (PCIE),
        ATI Mobility Radeon X700 (M26) (PCIE),
        ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
        ATI Radeon Mobility 9100 IGP (U3) 5835,
        ATI Radeon XPRESS 200 5954 (PCIE),
        ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
        ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
        ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
        ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
        ATI Radeon XPRESS 200M 5975 (PCIE),
        ATI Radeon XPRESS 200 5A41 (PCIE),
        ATI Radeon XPRESS 200M 5A42 (PCIE),
        ATI Radeon XPRESS 200 5A61 (PCIE),
        ATI Radeon XPRESS 200M 5A62 (PCIE),
        ATI Radeon X300 (RV370) 5B60 (PCIE),
        ATI Radeon X600 (RV370) 5B62 (PCIE),
        ATI Radeon X550 (RV370) 5B63 (PCIE),
        ATI FireGL V3100 (RV370) 5B64 (PCIE),
        ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
        ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
        ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
        ATI Mobility Radeon X800 XT (M28) (PCIE),
        ATI Mobility FireGL V5100 (M28) (PCIE),
        ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
        ATI Radeon X850 XT PE (R480) (PCIE),
        ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
        ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
        ATI Radeon X850 XT (R480) (PCIE),
        ATI Radeon X800XT (R423) 5D57 (PCIE),
        ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
        ATI Radeon X700 PRO (RV410) (PCIE),
        ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
        ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
        ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
        ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
        ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
        ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
        ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
        ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
        ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
        ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
        ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
        ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
        ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
        ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
        ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
        ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
        ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
        ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
        ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
        ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
        ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
        ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
        ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
        ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
        ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
        ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
        ATI Mobility Radeon X1700, ATI Radeon X2300HD,
        ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
        ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
        ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
        ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
        ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
        ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
        ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
        ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI ATI FireGL V7400,
        ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
        ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
        ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
        ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
        ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
        ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
        ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600, ATI RV610,
        ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
        ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
        ATI ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
        ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610, ATI RV670,
        ATI Radeon HD3870, ATI Radeon HD3850, ATI RV670,
        ATI Radeon HD3870 X2, ATI FireGL V7700, ATI RV630,
        ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
        ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
        ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
        ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
        ATI FireGL V3600, ATI Radeon HD 2600 LE, ATI Radeon HD 3470,
        ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Mobility Radeon HD 3430,
        ATI Mobility Radeon HD 3400 Series, ATI FireMV 2450, ATI FireMV 2260,
        ATI FireMV 2260, ATI ATI Radeon HD 3600 Series,
        ATI ATI Radeon HD 3650 AGP, ATI ATI Radeon HD 3600 PRO,
        ATI ATI Radeon HD 3600 XT, ATI ATI Radeon HD 3600 PRO,
        ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
        ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
        ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1        0        0xffffffff - 0xffffffff (0x1) MX
        [1] -1        0        0x000f0000 - 0x000fffff (0x10000) MX
        [2] -1        0        0x000c0000 - 0x000effff (0x30000) MX
        [3] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX
        [4] -1        0        0x0000ffff - 0x0000ffff (0x1) IX
        [5] -1        0        0x00000000 - 0x00000000 (0x1) IX
(II) resource ranges after probing:
        [0] -1        0        0xffffffff - 0xffffffff (0x1) MX
        [1] -1        0        0x000f0000 - 0x000fffff (0x10000) MX
        [2] -1        0        0x000c0000 - 0x000effff (0x30000) MX
        [3] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX
        [4] 0        0        0x000a0000 - 0x000affff (0x10000) MS
        [5] 0        0        0x000b0000 - 0x000b7fff (0x8000) MS
        [6] 0        0        0x000b8000 - 0x000bffff (0x8000) MS
        [7] -1        0        0x0000ffff - 0x0000ffff (0x1) IX
        [8] -1        0        0x00000000 - 0x00000000 (0x1) IX
        [9] 0        0        0x000003b0 - 0x000003bb (0xc) IS
        [10] 0        0        0x000003c0 - 0x000003df (0x20) IS
(II) Setting vga for screen 0.
(II) RADEON(0): MMIO registers at 0x00000000d0100000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"

(II) Loading /usr/X11R7/lib/X11/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 0.1.0
        ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->IOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon Mobility 9200 (M9+) 5C63 (AGP)" (ChipID = 0x5c63)
(--) RADEON(0): Linear framebuffer at 0x00000000d8000000
(II) RADEON(0): AGP card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Loading /usr/X11R7/lib/X11/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): Legacy BIOS detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.29.0
(==) RADEON(0): Page Flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=32768K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 32768 kByte (64 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 1152x900
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 20000, max_out_pll: 40000, min_in_pll: 40, max_in_pll: 3000, xclk: 20000, sclk: 200.000000, mclk: 215.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=20000
(II) RADEON(0): Bios Connector table:
(II) RADEON(0): Port0: DDCType-0x60, DACType-1, TMDSType-1, ConnectorType-1
(II) RADEON(0): Port4: DDCType-0x0, DACType-0, TMDSType-0, ConnectorType-7
(II) RADEON(0): Port5: DDCType-0x0, DACType-2, TMDSType-0, ConnectorType-5
(II) RADEON(0): Output VGA-0 using monitor section monitor0
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): Panel ID string: 1024x768               
(II) RADEON(0): Panel Size from BIOS: 1024x768
(II) RADEON(0): BIOS provided dividers will be used.
(WW) RADEON(0): LVDS Info:
XRes: 1024, YRes: 768, DotClock: 65000
HBlank: 320, HOverPlus: 16, HSyncWidth: 136
VBlank: 38, VOverPlus: 2, VSyncWidth: 6
(II) RADEON(0): Output S-video has no monitor section
(II) RADEON(0): Default TV standard: NTSC
(II) RADEON(0): TV standards supported by chip: NTSC PAL
(II) RADEON(0): Port0:
Monitor   -- AUTO
Connector -- VGA
DAC Type  -- Primary
TMDS Type -- None
DDC Type  -- 0x60
(II) RADEON(0): Port1:
Monitor   -- AUTO
Connector -- LVDS
DAC Type  -- None
TMDS Type -- None
DDC Type  -- 0x0
(II) RADEON(0): Port2:
Monitor   -- AUTO
Connector -- STV
DAC Type  -- TVDAC/ExtDAC
TMDS Type -- None
DDC Type  -- 0x0
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
finished output detect: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
finished output detect: 1
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "VGA-0:ddc2" removed.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 0
in RADEONProbeOutputModes
(II) RADEON(0): Added native panel mode: 1024x768
(II) RADEON(0): Adding Screen mode: 640x400
(II) RADEON(0): Adding Screen mode: 640x480
(II) RADEON(0): Adding Screen mode: 320x240
(II) RADEON(0): Adding Screen mode: 320x200
(II) RADEON(0): Adding Screen mode: 400x300
(II) RADEON(0): Total number of valid Screen mode(s) added: 5
(II) RADEON(0): Output: S-video, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output S-video disconnected
(II) RADEON(0): Using user preference for initial modes
(II) RADEON(0): Output LVDS using initial mode 640x400
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/X11R7/lib/X11/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"

(II) Loading /usr/X11R7/lib/X11/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.2.0
        ABI class: X.Org Video Driver, version 4.1
(==) RADEON(0): Assuming overlay scaler buffer width is 1536
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
        of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] -1        0        0xffffffff - 0xffffffff (0x1) MX
        [1] -1        0        0x000f0000 - 0x000fffff (0x10000) MX
        [2] -1        0        0x000c0000 - 0x000effff (0x30000) MX
        [3] -1        0        0x00000000 - 0x0009ffff (0xa0000) MX
        [4] 0        0        0x000a0000 - 0x000affff (0x10000) MS(OprU)
        [5] 0        0        0x000b0000 - 0x000b7fff (0x8000) MS(OprU)
        [6] 0        0        0x000b8000 - 0x000bffff (0x8000) MS(OprU)
        [7] -1        0        0x0000ffff - 0x0000ffff (0x1) IX
        [8] -1        0        0x00000000 - 0x00000000 (0x1) IX
        [9] 0        0        0x000003b0 - 0x000003bb (0xc) IS(OprU)
        [10] 0        0        0x000003c0 - 0x000003df (0x20) IS(OprU)
(II) RADEON(0): RADEONScreenInit d8000000 0 0
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0):   mem_size         : 0x04000000
(II) RADEON(0):   MC_FB_LOCATION   : 0xdbffd800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1152,7281)
(II) RADEON(0): Reserved area from (0,900) to (1152,914)
(II) RADEON(0): Largest offscreen area available: 1152 x 6367
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x83a000
(II) RADEON(0): Will use depth buffer at offset 0xc3c000
(II) RADEON(0): Will use 16128 kb for textures at offset 0x103e000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xd8000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(==) RADEON(0): Using AGP 4x
(II) RADEON(0): [agp] Mode 0x1f000207 [AGP 0x8086/0x3340; Card 0x1002/0x5c63]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xe0000000
(II) RADEON(0): [agp] Ring mapped at 0xb5791000
(II) RADEON(0): [agp] ring read ptr handle = 0xe0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb5790000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb5590000
(II) RADEON(0): [agp] GART texture map handle = 0xe0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xb50b0000
(II) RADEON(0): [drm] register handle = 0xd0100000
(II) RADEON(0): [dri] Visual configs initialized
init memmap
init common
init crtc1
init pll1
restore memmap
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0):   MC_FB_LOCATION   : 0xdbffd800 0x1fff0000
(II) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
restore common
restore crtc1
restore pll1
restore LVDS
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 11
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0):   MC_FB_LOCATION  was: 0xdbffd800 is: 0xdbffd800
(WW) RADEON(0):   MC_AGP_LOCATION was: 0xffffffc0 is: 0xe07fe000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0):   MC_FB_LOCATION   : 0xdbffd800 0xdbffd800
(II) RADEON(0):   MC_AGP_LOCATION  : 0xe07fe000
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): Render acceleration enabled
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Indirect CPU to Screen color expansion
        Solid Horizontal and Vertical Lines
        Scanline Image Writes
        Setting up tile and stipple cache:
                32 128x128 slots
                32 256x256 slots
                16 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor 0 (scanline 914)
(II) RADEON(0): Using hardware cursor 1 (scanline 917)
(II) RADEON(0): Largest offscreen area available: 1152 x 6359
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"

(II) Loading /usr/X11R7/lib/X11/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        ABI class: X.Org Video Driver, version 4.1
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(II) RADEON(0): Set up overlay video
(II) RADEON(0): Set up textured video
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/X11R7/lib/dri/r200_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 169 x 105



其中上面中我觉得是这里有问题:

(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse1
(WW) Disabling Keyboard1
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)


(--) PCI:*(0@1:0:0) unknown vendor (0x1002) unknown chipset (0x5c63) rev 1, Mem @ 0xd8000000/0, 0xd0100000/0, I/O @ 0x00003000/0, BIOS @ 0x????????/131072
(II) System resource ranges:
 楼主| 发表于 2009-1-3 17:30:54 | 显示全部楼层
下面是使用xorgconfig自动生成的xorg.conf

# File generated by xorgconfig.

#
# Copyright 2004 The X.Org Foundation
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
#

# **********************************************************************
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this  section  is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

    Load        "dbe"          # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection

# This loads the font modules
#    Load        "type1"
    Load        "freetype"
#    Load        "xtt"

# This loads the GLX module
#    Load       "glx"
# This loads the DRI module
#    Load       "dri"

EndSection

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#

    FontPath   "/usr/X11R7/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R7/lib/X11/fonts/TTF/"
    FontPath   "/usr/X11R7/lib/X11/fonts/OTF"
    FontPath   "/usr/X11R7/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R7/lib/X11/fonts/100dpi/"
    FontPath   "/usr/X11R7/lib/X11/fonts/75dpi/"
#    FontPath   "/usr/X11R7/lib/X11/fonts/local/"
#    FontPath   "/usr/X11R7/lib/X11/fonts/TrueType/"
#    FontPath   "/usr/X11R7/lib/X11/fonts/freefont/"

# The module search path.  The default path is shown here.

#    ModulePath "/usr/X11R7/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received.  This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

#    Option "NoTrapSignals"

# Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
# (where n is 1 through 12).  This allows clients to receive these key
# events.

#    Option "DontVTSwitch"

# Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

#    Option "DontZap"

# Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
# sequences.  This allows clients to receive these key events.

#    Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

#    Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

#    Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

#    Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

#    Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

    Identifier        "Keyboard1"
    Driver        "kbd"

    Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option        "Xleds"      "1 2 3"

#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant"  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions"  "ctrl:swapcaps"

# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant"  ""
#    Option "XkbOptions"  ""

#    Option "XkbDisable"

    Option "XkbRules"        "xorg"
    Option "XkbModel"        "pc105"
    Option "XkbLayout"        "us"
    Option "XkbVariant"        "en_US"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

    Identifier        "Mouse1"
    Driver        "mouse"
    Option "rotocol"    "IMPS/2"        # IntelliMouse PS/2
    Option "Device"      "mouse0"

# Mouse-speed setting for PS/2 mouse.

#    Option "Resolution"        "256"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

#    Option "BaudRate"        "9600"
#    Option "SampleRate"        "150"

# Mouse wheel mapping.  Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7.   Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.

    Option "ZAxisMapping"   "4 5 6 7"

# Emulate3Buttons is an option for 2-button mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices.  This is for example only.  Refer
# to the xorg.conf man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
#    Identifier  "Mouse2"
#    Driver      "mouse"
#    Option      "rotocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber"  "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber"  "1"
#    Option     "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

    Identifier  "monitor0"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    HorizSync   31.5 - 48.5

#    HorizSync        30-64         # multisync
#    HorizSync        31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync        15-25, 30-50  # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

    VertRefresh 50-70

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
    Identifier        "Standard VGA"
    VendorName        "Unknown"
    BoardName        "Unknown"

# The chipset line is optional in most cases.  It can be used to override
# the driver's chipset detection, and should not normally be specified.

#    Chipset        "generic"

# The Driver line must be present.  When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module.  Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for.  When this line isn't present, a device
# section can only match up with the primary video device.  For PCI
# devices a line like the following could be used.  This line should not
# normally be included unless there is more than one video device
# intalled.

#    BusID      "CI:0:10:0"

#    VideoRam        256

#    Clocks        25.2 28.3

EndSection

# Device configured by xorgconfig:

Section "Device"
    Identifier  "video0"
    Driver      "ati"
    #VideoRam    32768
    # Insert Clocks lines here if appropriate
EndSection


# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present.  Each describes
# the configuration of a single screen.  A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier  "Screen 1"
    Device      "video0"
    Monitor     "monitor0"
    DefaultDepth 24

    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
        Virtual     1600 1280
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
        ViewPort    0 0
        Virtual     1280 1024
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "640x400" "640x480" "1024x768" "320x240" "320x200" "400x300"
        ViewPort    0 0
        Virtual     1152 900
    EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present.  Each describes
# the way multiple screens are organised.  A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option.  In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
    Identifier  "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens.  The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.  In this example, screen 2 is located to the
# right of screen 1.

    Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used.  Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"

EndSection

# Section "DRI"
#    Mode 0666
# EndSection
回复 支持 反对

使用道具 举报

发表于 2009-1-5 23:43:56 | 显示全部楼层
1.建议LZ先仔细看下自己贴的东西
2.建议看下《提问的智慧》
绝无它意,个人意见
回复 支持 反对

使用道具 举报

发表于 2009-1-6 09:32:48 | 显示全部楼层
是不是键盘和鼠标都不动?

有个标志,要加到 xorg.conf 里面 

Section "ServerFlags"
        Option "AutoAddDevices" "false"
        Option "AllowEmptyInput" "false"
EndSection
回复 支持 反对

使用道具 举报

 楼主| 发表于 2009-1-7 19:47:00 | 显示全部楼层
非常感谢,问题已解决,正是楼上的兄弟说的那样
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表