benq dw1640刻录机的问题。cdrecord -scanbus后出现下面的信息。

fou · 发表于 2005-11-3 22:05:22

bash-3.00# cdrecord -scanbus
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jg Schilling
cdrecord: No such file or directory. Cannot open '/dev/pg*'. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'

晨想 · 发表于 2005-11-4 00:18:21

cdrecord dev=/dev/hdc -data x.iso
我是这么用的。

fou · 发表于 2005-11-4 07:45:13

这样不行呀。
我在怀疑是不是因为我的刻录机是装在从盘的。是否必须装在主盘才行呢？

benxiong · 发表于 2005-11-4 21:23:08

试试 #cdrecord -scanbus dev=ATAPI

fou · 发表于 2005-11-5 17:55:56

加上ATAPI后是可以了。但是运行下面的命令后，依然出现这样的错误

bash-3.00# cdrecord -v -eject speed=8 dev=0,1,0 ytht.iso
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
cdrecord: No such device. Cannot open '/dev/pg1'. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.

benxiong · 发表于 2005-11-5 21:14:48

试试 #cdrecord -v -eject speed=8 dev=ATAPI:0,1,0 -data ytht.iso

		自动登录	找回密码
密码			注册