LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
查看: 1091|回复: 1

从给内核单独编译设备驱动模块,到使用模块,全过程,推荐看看.

[复制链接]
发表于 2003-2-10 03:00:11 | 显示全部楼层 |阅读模式
http://www.scyld.com/expert/modules.html


Using Linux Device Drivers as Modules

This page contains instructions on using Linux device drivers as loadable kernel modules.

Linux has a facility for linking device drivers into the running kernel. This is called Modules support. With the vast variety of supported devices, pre-linking a kernel with all device drivers is impractical. Using loadable modules allow a commercial Linux distribution to use a small initial kernel and link in the device support needed after the machine has booted.
Compiling a Device Driver Module

You may skip this step if a pre-compiled module is available for your Linux distribution. In many cases drivers compiled for similar kernel versions will work. Pre-compiled modules in the form of RPMS for popular distributions are frequently available for Scyld provided device drivers.

If a pre-compiled module is not available, you'll have to compile one from the driver source code, or the source code RPM (SRPM). In the instructions below driver.c refers to the name of the driver source file for your device e.g. 3c59x.c, and driver.o refers to the compiled driver module binary.

    * Verify that the source code for your current kernel version is installed.
    * If you don't have a /usr/include/linux/version.h file, do
      cd /usr/src/linux; make include/linux/version.h
    * Copy the driver source code to a source directory. I usually use /usr/src/modules/driver.c.
    * Compile the file using the compile-command at the bottom of the driver source file. If a compile-command is not there use the following compile command:
      gcc -DMODULE -D__KERNEL__ -O6 -c driver.c
    * As 'root', test the module by doing "insmod driver.o".
    * Install the driver module in the proper location for your distribution. This is usually /lib/modules/kernel-version/net/driver.o. The command to do this is
      install -m 644 driver.o /lib/modules/`uname -r`/net/

Possible problems and solutions

If you get an "linux/version.h no such file or directory" message when compiling the driver, you either have not installed the kernel source code, or you haven't run

        cd /usr/src/linux; make include/linux/version.h

yet. Most modern distributions install the essential header files of the kernel source code, including a pre-built "version.h", so this isn't always necessary.

If you get a "modversions.h not found" message when compiling the driver, delete '-DMODVERSIONS' from the command used to compile the driver module.
Testing the New Module

As 'root', load the module using "insmod driver.o" and execute the appropriate 'route add -net ...' for your local network.

If the networking works correctly, add the module to your system configuration. For Slackware and most other systems, add the insmod command to /etc/rc.d/rc.inet1 or /etc/rc.d/rc.local. RedHat users should add the insmod line to /etc/rc.d/rc.modules or copy driver.o to /lib/modules/`uname -r`/net/ and add the following line to /etc/conf.modules:
alias eth0 driver
Modifying Driver Operation Through Options

Drivers are designed with the goal that no options should be needed in most environments. However not all cards and networks can be automatically configured, thus drivers allow operational parameters to be modified when they are loaded as a module. Typically the following variables may be set:

name            type        description
debug             int     The debug message level, 0 (no messages) to 6 (wordy).
options     int[]   Per-card media type override and card operation
                     settings, typically the media type.
full_duplex int[]   Set to '1' to force this interface to always be used in FD mode.

To test an option, load the module (as above) with a command such as "/sbin/insmod driver.o full_duplex=1,0,1". This command sets the full_duplex flag for the first and third cards of this type.

To set module parameters when the module is loaded automatically, add the following line to /etc/conf.modules
alias eth0 driver options driver full_duplex=1,0,1 debug=0
Note that spaces are permitted only between parameter names, not between the comma-separated numeric options.
Problems and Solutions

What if the card is detected with a ff:ff:ff:ff:ff:ff station address?

There are three known causes of this problem.

    * Warm-booting from Win95 OSR2.1 or Win98 (power-managed cards only)
    * "nP OS" is set in the PCI BIOS setup.
    * Broken PCI BIOSes (reportedly version "AI78" is broken).

The "D3-cold" problem

Quick summary: restore operation by unplugging the machine after running an OS that disables the card. Merely using the "soft-off" pushbutton on a ATX case is not sufficient.

Many modern PCI chips have ACPI power management capability. Some include a mode known as "D3-cold", where the chip can power itself off. When in this mode the chip uses only the tiny amount of stand-by power always available when an ATX power supply is plugged in. In the D3-cold mode the chip can be turned on only by writing a PCI configuration space register. This works great if you have a ACPI-aware BIOS that knows how to re-enable the chip on a warm boot, but older BIOS don't know that the chip cannot retain configuration information. When the machine is warm booted the chip has only invalid configuration information.

The PnP OS problem occurs because Microsoft has convinced BIOS makers to modify their PCI device configuration from the previous rational standard, to one that works well only with Microsoft operating systems. Where previously the BIOS allocated resources for and enabled the PCI device by default, it now does so only for boot devices and audio devices. (Why are audio devices specifically an exception? Because MS-Windows can't handle the resource allocation for them!)

The solution is to either update to the latest driver, (the drivers are being re-worked to enable the devices) or to disable the "nP OS" setting in the machine's BIOS setup.

The reason Microsoft had to have this change implemented for them was that MS-Windows still handles some devices with "real-mode" drivers, and this change makes it easier to mix real-mode and protected-mode device drivers. This is an excellent example of Microsoft using its dominant position in the software industry force a technical change that is detrimental to other operating systems.
Legal Info

This a not a legal statement. Read the Gnu General Public License (GPL) to find your actual rights. These are just guidelines to assist in interpreting that document.
Legal status of a loaded Module

Loading a device driver module is functionally identical to conventionally building a kernel. The final result is a single Work, as that term is used in the license. The time that the linking is done does not affect the legal status of the individual parts or the whole: legally, changes in structure, procedure or nomenclature are evaluated by the conventional usage.
What does the GPL mean by a "Work"?

Device drivers are not Works (as that term is used in the license), merely componets of a Work. At minimum a network device driver must be linked with a queuing system, protocol stack and a widely used "API" (such as the Berkeley socket interface) to be an independent Work. Similarly a block device driver must be linked with a buffer layer, a memory management or file system, and a commonly used API to be consider a minimum Work. More commonly, multiple types of drivers are linked into a complete Operating System, and that collection is a single Work. Once again, novel structures are legally evaluated by their functionally-equivalent conventional counterparts. If you implement an operating system by putting each function in its own address space, that doesn't mean that each function is a program and the collection is a "mere aggregation"! The message passing used to communicate is just another method of linking the parts into a single complete Work.
"orting" device drivers

Converting a driver licensed under the GPL to work with a non-GPLed OS is permitted, however you are not permitted to distribute the resulting Work. You may describe to others how to do the conversion, but an automated kit, such as a "patch" file, is equivalent to distributing a converted Work and is not permitted.
"Third party" ports

If a third party writes an interface layer between a non-GPL program and a GPL function (note: here I'm concerned only with device drivers), distribution of that interface layer necessarily violates one of the licenses. In the special case of a non-licensed "public domain" program, the entire Work must be place under the GPL.
"Second party" ports

If the copyright holder writes to the non-public interface of a GPL device driver, their entire Work falls under the GPL. Merely having access to the source code does not make every line break or function a public interface: that would make the word "interface" meanless! Things that are clearly public interfaces:

    * Written industry standards, such as those from the IEEE or ISO.
    * De facto standard used by a large number of unrelated parties.
    * Any programming or scripting language that a user sees.
    * Any frequently repeated keystroke sequence or action that a user must do.
    * Anything the copyright holder declares or presents as a public interface.

There are questionable areas that require judgement here: if many independent parties are using an interface, then it's a de facto standard. But if only one other party is, it might not be a public interface.
Summary

    * You have the freedom to write any code you like.
    * You are free to use any code you are licensed to use.
    * But you are not always free to distribute the result.

You must respect the copyright of the people that wrote the original code and observe their license.
A personal note about legal issues

GPLed source code is *not* in the public domain. People that wouldn't consider using "warez" (stolen binary software) somehow don't have the same moral aversion to violating the license of software provided to them under much more generous terms. The result is that I must spend much more time tracking down copyright violations than if I had a restrictive license. I hope this is merely a lack of cultural experience with the GPL.
发表于 2003-2-10 10:30:15 | 显示全部楼层
好东西。。够牛的。。。
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表