设为首页收藏本站

LinuxSir.cn，穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
LinuxSir.cn，穿越时空的Linuxsir!»论坛 › Linux 综合讨论区 —— LinuxSir.cn › 硬件设备 Linux 驱动 › 无法识别佳能Ixus 860数码相机
返回列表 发新帖
查看: 1417|回复: 9

无法识别佳能Ixus 860数码相机

[复制链接]
南燕
发表于 2009-1-4 13:11:22 | 显示全部楼层 |阅读模式
使用Ubuntu, Xfce 4，然后接入数码相机，有提示检测到相机，问是否要导入图片，点击是后启动了f-spot，但是没有看到一张照片，相机里确实有照片的。

能否自己手工挂载，就类似于U盘一样访问？

lsusb的输出

  2. Bus 004 Device 007: ID 04a9:3160 Canon, Inc.
  3. Bus 004 Device 001: ID 0000:0000  
  4. Bus 003 Device 001: ID 0000:0000  
  5. Bus 002 Device 002: ID 046d:c03d Logitech, Inc.
  6. Bus 002 Device 001: ID 0000:0000  
  7. Bus 001 Device 001: ID 0000:0000  
复制代码

可见是有找到这台相机，但是就是找不到它是什么设备
dmesg输出

  2. [    0.000000] Initializing cgroup subsys cpuset
  3. [    0.000000] Initializing cgroup subsys cpu
  4. [    0.000000] Linux version 2.6.24-23-generic (buildd@palmer) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Thu Nov 27 18:44:42 UTC 2008 (Ubuntu 2.6.24-23.46-generic)
  5. [    0.000000] BIOS-provided physical RAM map:
  6. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  7. [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  8. [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  9. [    0.000000]  BIOS-e820: 0000000000100000 - 000000003f7fa000 (usable)
  10. [    0.000000]  BIOS-e820: 000000003f7fa000 - 000000003f7fd000 (ACPI data)
  11. [    0.000000]  BIOS-e820: 000000003f7fd000 - 000000003f7fe000 (ACPI NVS)
  12. [    0.000000]  BIOS-e820: 000000003f7fe000 - 000000003f800000 (reserved)
  13. [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
  14. [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  15. [    0.000000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
  16. [    0.000000] 119MB HIGHMEM available.
  17. [    0.000000] 896MB LOWMEM available.
  18. [    0.000000] Entering add_active_range(0, 0, 260090) 0 entries of 256 used
  19. [    0.000000] Zone PFN ranges:
  20. [    0.000000]   DMA             0 ->     4096
  21. [    0.000000]   Normal       4096 ->   229376
  22. [    0.000000]   HighMem    229376 ->   260090
  23. [    0.000000] Movable zone start PFN for each node
  24. [    0.000000] early_node_map[1] active PFN ranges
  25. [    0.000000]     0:        0 ->   260090
  26. [    0.000000] On node 0 totalpages: 260090
  27. [    0.000000]   DMA zone: 32 pages used for memmap
  28. [    0.000000]   DMA zone: 0 pages reserved
  29. [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
  30. [    0.000000]   Normal zone: 1760 pages used for memmap
  31. [    0.000000]   Normal zone: 223520 pages, LIFO batch:31
  32. [    0.000000]   HighMem zone: 239 pages used for memmap
  33. [    0.000000]   HighMem zone: 30475 pages, LIFO batch:7
  34. [    0.000000]   Movable zone: 0 pages used for memmap
  35. [    0.000000] DMI 2.3 present.
  36. [    0.000000] ACPI: RSDP signature @ 0xC00F5810 checksum 0
  37. [    0.000000] ACPI: RSDP 000F5810, 0014 (r0 ASUS  )
  38. [    0.000000] ACPI: RSDT 3F7FA000, 0030 (r1 ASUS   P4B533-V 42302E31 MSFT 31313031)
  39. [    0.000000] ACPI: FACP 3F7FA0C0, 0074 (r1 ASUS   P4B533-V 42302E31 MSFT 31313031)
  40. [    0.000000] ACPI: DSDT 3F7FA134, 2872 (r1   ASUS P4B533-V     1000 MSFT  100000B)
  41. [    0.000000] ACPI: FACS 3F7FD000, 0040
  42. [    0.000000] ACPI: BOOT 3F7FA030, 0028 (r1 ASUS   P4B533-V 42302E31 MSFT 31313031)
  43. [    0.000000] ACPI: APIC 3F7FA058, 005A (r1 ASUS   P4B533-V 42302E31 MSFT 31313031)
  44. [    0.000000] ACPI: PM-Timer IO Port: 0xe408
  45. [    0.000000] ACPI: Local APIC address 0xfee00000
  46. [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  47. [    0.000000] Processor #0 15:2 APIC version 20
  48. [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  49. [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  50. [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
  51. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
  52. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level)
  53. [    0.000000] ACPI: IRQ0 used by override.
  54. [    0.000000] ACPI: IRQ2 used by override.
  55. [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
  56. [    0.000000] Using ACPI (MADT) for SMP configuration information
  57. [    0.000000] Allocating PCI resources starting at 40000000 (gap: 3f800000:bf400000)
  58. [    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
  59. [    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
  60. [    0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
  61. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258059
  62. [    0.000000] Kernel command line: root=UUID=5fe2f891-5cb3-4244-bb2c-08540a0241b2 ro quiet locale=zh_CN vga=769
  63. [    0.000000] mapped APIC to ffffb000 (fee00000)
  64. [    0.000000] mapped IOAPIC to ffffa000 (fec00000)
  65. [    0.000000] Enabling fast FPU save and restore... done.
  66. [    0.000000] Enabling unmasked SIMD FPU exception support... done.
  67. [    0.000000] Initializing CPU#0
  68. [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
  69. [    0.000000] Detected 1980.819 MHz processor.
  70. [   19.489212] Console: colour dummy device 80x25
  71. [   19.489217] console [tty0] enabled
  72. [   19.490110] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  73. [   19.491023] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  74. [   19.539672] Memory: 1019212k/1040360k available (2178k kernel code, 20388k reserved, 1005k data, 368k init, 122856k highmem)
  75. [   19.539687] virtual kernel memory layout:
  76. [   19.539689]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
  77. [   19.539691]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
  78. [   19.539692]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
  79. [   19.539693]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
  80. [   19.539695]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
  81. [   19.539696]       .data : 0xc0320918 - 0xc041bdc4   (1005 kB)
  82. [   19.539698]       .text : 0xc0100000 - 0xc0320918   (2178 kB)
  83. [   19.539702] Checking if this processor honours the WP bit even in supervisor mode... Ok.
  84. [   19.539779] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
  85. [   19.619662] Calibrating delay using timer specific routine.. 3965.86 BogoMIPS (lpj=7931739)
  86. [   19.619709] Security Framework initialized
  87. [   19.619723] SELinux:  Disabled at boot.
  88. [   19.619746] AppArmor: AppArmor initialized
  89. [   19.619752] Failure registering capabilities with primary security module.
  90. [   19.619766] Mount-cache hash table entries: 512
  91. [   19.619995] Initializing cgroup subsys ns
  92. [   19.620001] Initializing cgroup subsys cpuacct
  93. [   19.620022] CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  94. [   19.620040] CPU: Trace cache: 12K uops, L1 D cache: 8K
  95. [   19.620044] CPU: L2 cache: 512K
  96. [   19.620048] CPU: Hyper-Threading is disabled
  97. [   19.620052] CPU: After all inits, caps: 3febfbff 00000000 00000000 00043080 00000000 00000000 00000000 00000000
  98. [   19.620071] Compat vDSO mapped to ffffe000.
  99. [   19.620092] Checking 'hlt' instruction... OK.
  100. [   19.636228] SMP alternatives: switching to UP code
  101. [   19.638514] Freeing SMP alternatives: 11k freed
  102. [   19.638703] Early unpacking initramfs... done
  103. [   20.090626] ACPI: Core revision 20070126
  104. [   20.090691] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
  105. [   20.092205] CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
  106. [   20.092255] Total of 1 processors activated (3965.86 BogoMIPS).
  107. [   20.092403] ENABLING IO-APIC IRQs
  108. [   20.092596] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
  109. [   20.238582] Brought up 1 CPUs
  110. [   20.238612] CPU0 attaching sched-domain:
  111. [   20.238617]  domain 0: span 01
  112. [   20.238620]   groups: 01
  113. [   20.238884] net_namespace: 64 bytes
  114. [   20.238897] Booting paravirtualized kernel on bare hardware
  115. [   20.239685] Time:  3:24:02  Date: 01/04/09
  116. [   20.239721] NET: Registered protocol family 16
  117. [   20.240031] EISA bus registered
  118. [   20.240061] ACPI: bus type pci registered
  119. [   20.242091] PCI: PCI BIOS revision 2.10 entry at 0xf2240, last bus=1
  120. [   20.242094] PCI: Using configuration type 1
  121. [   20.242115] Setting up standard PCI resources
  122. [   20.251383] ACPI: EC: Look up EC in DSDT
  123. [   20.258315] ACPI: Interpreter enabled
  124. [   20.258320] ACPI: (supports S0 S1 S4 S5)
  125. [   20.258341] ACPI: Using IOAPIC for interrupt routing
  126. [   20.265610] ACPI: PCI Root Bridge [PCI0] (0000:00)
  127. [   20.266169] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
  128. [   20.266171] * this clock source is slow. If you are sure your timer does not have
  129. [   20.266173] * this bug, please use "acpi_pm_good" to disable the workaround
  130. [   20.266227] PCI: Enabled i801 SMBus device
  131. [   20.266235] PCI quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
  132. [   20.266240] PCI quirk: region ec00-ec3f claimed by ICH4 GPIO
  133. [   20.266654] PCI: Transparent bridge - 0000:00:1e.0
  134. [   20.266680] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  135. [   20.266797] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
  136. [   20.268584] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
  137. [   20.268685] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
  138. [   20.268799] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
  139. [   20.268912] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
  140. [   20.269009] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
  141. [   20.269122] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
  142. [   20.269220] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
  143. [   20.269332] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
  144. [   20.269487] Linux Plug and Play Support v0.97 (c) Adam Belay
  145. [   20.269537] pnp: PnP ACPI init
  146. [   20.269549] ACPI: bus type pnp registered
  147. [   20.274732] pnp: PnP ACPI: found 13 devices
  148. [   20.274736] ACPI: ACPI bus type pnp unregistered
  149. [   20.274743] PnPBIOS: Disabled by ACPI PNP
  150. [   20.275107] PCI: Using ACPI for IRQ routing
  151. [   20.275111] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
  152. [   20.294426] NET: Registered protocol family 8
  153. [   20.294429] NET: Registered protocol family 20
  154. [   20.294533] AppArmor: AppArmor Filesystem Enabled
  155. [   20.298407] Time: tsc clocksource has been installed.
  156. [   20.306453] system 00:00: iomem range 0x0-0x9ffff could not be reserved
  157. [   20.306457] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
  158. [   20.306461] system 00:00: iomem range 0x100000-0x3f7fffff could not be reserved
  159. [   20.306466] system 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved
  160. [   20.306470] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
  161. [   20.306480] system 00:02: ioport range 0xe400-0xe47f has been reserved
  162. [   20.306484] system 00:02: ioport range 0xe800-0xe81f has been reserved
  163. [   20.306487] system 00:02: ioport range 0xec00-0xec3f has been reserved
  164. [   20.306490] system 00:02: ioport range 0x4d6-0x4d6 has been reserved
  165. [   20.306495] system 00:02: iomem range 0xfff80000-0xffffffff could not be reserved
  166. [   20.306499] system 00:02: iomem range 0xffb80000-0xffbfffff has been reserved
  167. [   20.306507] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
  168. [   20.306522] system 00:0c: ioport range 0x3f0-0x3f1 has been reserved
  169. [   20.337101] PCI: Bridge: 0000:00:1e.0
  170. [   20.337107]   IO window: b000-bfff
  171. [   20.337113]   MEM window: d6000000-d67fffff
  172. [   20.337119]   PREFETCH window: d7f00000-d7ffffff
  173. [   20.337136] PCI: Setting latency timer of device 0000:00:1e.0 to 64
  174. [   20.337153] NET: Registered protocol family 2
  175. [   20.374383] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  176. [   20.374895] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  177. [   20.376218] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  178. [   20.377029] TCP: Hash tables configured (established 131072 bind 65536)
  179. [   20.377035] TCP reno registered
  180. [   20.386523] checking if image is initramfs... it is
  181. [   20.837395] Switched to high resolution mode on CPU 0
  182. [   21.274380] Freeing initrd memory: 7316k freed
  183. [   21.274628] Simple Boot Flag at 0x3a set to 0x1
  184. [   21.275229] audit: initializing netlink socket (disabled)
  185. [   21.275249] audit(1231039442.632:1): initialized
  186. [   21.275517] highmem bounce pool size: 64 pages
  187. [   21.278425] VFS: Disk quotas dquot_6.5.1
  188. [   21.278539] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  189. [   21.278753] io scheduler noop registered
  190. [   21.278757] io scheduler anticipatory registered
  191. [   21.278760] io scheduler deadline registered
  192. [   21.278778] io scheduler cfq registered (default)
  193. [   21.278796] Boot video device is 0000:00:02.0
  194. [   21.279264] isapnp: Scanning for PnP cards...
  195. [   21.633005] isapnp: No Plug & Play device found
  196. [   21.679987] Real Time Clock Driver v1.12ac
  197. [   21.680122] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
  198. [   21.680271] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  199. [   21.680460] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  200. [   21.681421] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  201. [   21.681847] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  202. [   21.683025] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
  203. [   21.683127] input: Macintosh mouse button emulation as /devices/virtual/input/input0
  204. [   21.683289] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
  205. [   21.683294] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
  206. [   21.683930] serio: i8042 KBD port at 0x60,0x64 irq 1
  207. [   21.687994] mice: PS/2 mouse device common for all mice
  208. [   21.688172] EISA: Probing bus 0 at eisa.0
  209. [   21.688212] EISA: Detected 0 cards.
  210. [   21.688217] cpuidle: using governor ladder
  211. [   21.688219] cpuidle: using governor menu
  212. [   21.688358] NET: Registered protocol family 1
  213. [   21.688401] Using IPI No-Shortcut mode
  214. [   21.688445] registered taskstats version 1
  215. [   21.688560]   Magic number: 9:955:410
  216. [   21.688704] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  217. [   21.688707] EDD information not available.
  218. [   21.689222] Freeing unused kernel memory: 368k freed
  219. [   21.689257] Write protecting the kernel read-only data: 801k
  220. [   21.719761] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
  221. [   21.841873] vesafb: framebuffer at 0xd8000000, mapped to 0xf8880000, using 600k, total 8000k
  222. [   21.841879] vesafb: mode is 640x480x8, linelength=640, pages=24
  223. [   21.841882] vesafb: scrolling: redraw
  224. [   21.841886] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
  225. [   21.842060] Console: switching to colour frame buffer device 80x30
  226. [   21.843121] fb0: VESA VGA frame buffer device
  227. [   22.006539] fuse init (API version 7.9)
  228. [   22.035141] ACPI: Invalid PBLK length [5]
  229. [   22.035217] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126]
  230. [   22.721457] usbcore: registered new interface driver usbfs
  231. [   22.721493] usbcore: registered new interface driver hub
  232. [   22.733807] usbcore: registered new device driver usb
  233. [   22.747834] USB Universal Host Controller Interface driver v3.0
  234. [   22.747929] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
  235. [   22.747944] PCI: Setting latency timer of device 0000:00:1d.0 to 64
  236. [   22.747950] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  237. [   22.748363] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
  238. [   22.748398] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800
  239. [   22.748596] usb usb1: configuration #1 chosen from 1 choice
  240. [   22.748633] hub 1-0:1.0: USB hub found
  241. [   22.748642] hub 1-0:1.0: 2 ports detected
  242. [   22.813992] SCSI subsystem initialized
  243. [   22.849721] ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 17
  244. [   22.849740] PCI: Setting latency timer of device 0000:00:1d.1 to 64
  245. [   22.849745] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  246. [   22.849778] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
  247. [   22.849811] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000d400
  248. [   22.849976] usb usb2: configuration #1 chosen from 1 choice
  249. [   22.850012] hub 2-0:1.0: USB hub found
  250. [   22.850021] hub 2-0:1.0: 2 ports detected
  251. [   22.882147] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
  252. [   22.895265] libata version 3.00 loaded.
  253. [   22.953546] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
  254. [   22.953563] PCI: Setting latency timer of device 0000:00:1d.2 to 64
  255. [   22.953569] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  256. [   22.953607] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
  257. [   22.953642] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
  258. [   22.953803] usb usb3: configuration #1 chosen from 1 choice
  259. [   22.953837] hub 3-0:1.0: USB hub found
  260. [   22.953846] hub 3-0:1.0: 2 ports detected
  261. [   23.057454] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
  262. [   23.057474] PCI: Setting latency timer of device 0000:00:1d.7 to 64
  263. [   23.057479] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  264. [   23.057516] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
  265. [   23.061429] ehci_hcd 0000:00:1d.7: debug port 1
  266. [   23.061438] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
  267. [   23.061451] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xd6800000
  268. [   23.077122] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  269. [   23.077332] usb usb4: configuration #1 chosen from 1 choice
  270. [   23.077369] hub 4-0:1.0: USB hub found
  271. [   23.077379] hub 4-0:1.0: 6 ports detected
  272. [   23.181241] ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 21 (level, low) -> IRQ 20
  273. [   23.185878] eth0: VIA Rhine II at 0xd6000000, 00:05:5d:e8:f4:7d, IRQ 20.
  274. [   23.186597] eth0: MII PHY found at address 8, status 0x7869 advertising 05e1 Link 41e1.
  275. [   23.186992] ata_piix 0000:00:1f.1: version 2.12
  276. [   23.187013] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
  277. [   23.187072] PCI: Setting latency timer of device 0000:00:1f.1 to 64
  278. [   23.189329] scsi0 : ata_piix
  279. [   23.190703] scsi1 : ata_piix
  280. [   23.191313] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
  281. [   23.191317] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
  282. [   23.408822] ata1.00: HPA unlocked: 60036479 -> 60036480, native 60036480
  283. [   23.408830] ata1.00: ATA-5: IBM-DTLA-307030, TX4OA60A, max UDMA/100
  284. [   23.408834] ata1.00: 60036480 sectors, multi 16: LBA
  285. [   23.437571] ata1.00: configured for UDMA/100
  286. [   23.656525] ata2.00: ATA-6: ST3160021A, 8.01, max UDMA/100
  287. [   23.656531] ata2.00: 312581808 sectors, multi 16: LBA48
  288. [   23.672469] ata2.00: configured for UDMA/100
  289. [   23.672651] scsi 0:0:0:0: Direct-Access     ATA      IBM-DTLA-307030  TX4O PQ: 0 ANSI: 5
  290. [   23.672848] scsi 1:0:0:0: Direct-Access     ATA      ST3160021A       8.01 PQ: 0 ANSI: 5
  291. [   23.747835] usb 2-2: new low speed USB device using uhci_hcd and address 2
  292. [   23.923765] usb 2-2: configuration #1 chosen from 1 choice
  293. [   23.949042] Driver 'sd' needs updating - please use bus_type methods
  294. [   23.949171] sd 0:0:0:0: [sda] 60036480 512-byte hardware sectors (30739 MB)
  295. [   23.949192] sd 0:0:0:0: [sda] Write Protect is off
  296. [   23.949196] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  297. [   23.949226] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  298. [   23.949296] sd 0:0:0:0: [sda] 60036480 512-byte hardware sectors (30739 MB)
  299. [   23.949313] sd 0:0:0:0: [sda] Write Protect is off
  300. [   23.949317] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  301. [   23.949346] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  302. [   23.949351]  sda: sda1 sda2 <<6>usbcore: registered new interface driver hiddev
  303. [   23.986577]  sda5 >
  304. [   23.986726] sd 0:0:0:0: [sda] Attached SCSI disk
  305. [   23.986824] sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
  306. [   23.986845] sd 1:0:0:0: [sdb] Write Protect is off
  307. [   23.986849] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  308. [   23.986879] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  309. [   23.986944] sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
  310. [   23.986960] sd 1:0:0:0: [sdb] Write Protect is off
  311. [   23.986964] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  312. [   23.986994] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  313. [   23.986999]  sdb:<6>input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input2
  314. [   24.003449] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2
  315. [   24.003478] usbcore: registered new interface driver usbhid
  316. [   24.003484] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
  317. [   24.010047]  sdb1 sdb2 < sdb5 sdb6 sdb7 >
  318. [   24.046498] sd 1:0:0:0: [sdb] Attached SCSI disk
  319. [   24.060726] sd 0:0:0:0: Attached scsi generic sg0 type 0
  320. [   24.060756] sd 1:0:0:0: Attached scsi generic sg1 type 0
  321. [   24.568420] Attempting manual resume
  322. [   24.568425] swsusp: Resume From Partition 8:5
  323. [   24.568428] PM: Checking swsusp image.
  324. [   24.568635] PM: Resume from disk failed.
  325. [   24.614174] kjournald starting.  Commit interval 5 seconds
  326. [   24.614196] EXT3-fs: mounted filesystem with ordered data mode.
  327. [   38.914840] Linux agpgart interface v0.102
  328. [   39.078651] agpgart: Detected an Intel 830M Chipset.
  329. [   39.078812] agpgart: Detected 8060K stolen memory.
  330. [   39.113460] agpgart: AGP aperture is 128M @ 0xd8000000
  331. [   39.205842] i810_smbus 0000:00:02.0: i810/i815 i2c device found.
  332. [   39.370063] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  333. [   39.425884] iTCO_vendor_support: vendor-support=0
  334. [   39.469862] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
  335. [   39.470055] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0xe460)
  336. [   39.470117] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  337. [   39.537782] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  338. [   39.649410] intel_rng: FWH not detected
  339. [   39.691146] input: Power Button (FF) as /devices/virtual/input/input3
  340. [   39.701324] ACPI: Power Button (FF) [PWRF]
  341. [   39.701506] input: Power Button (CM) as /devices/virtual/input/input4
  342. [   39.713280] ACPI: Power Button (CM) [PWRB]
  343. [   40.176982] input: PC Speaker as /devices/platform/pcspkr/input/input5
  344. [   42.296501] parport_pc 00:08: reported by Plug and Play ACPI
  345. [   42.296560] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
  346. [   42.810273] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 20
  347. [   45.160865] lp0: using parport0 (interrupt-driven).
  348. [   45.246081] Adding 1285160k swap on /dev/sda5.  Priority:-1 extents:1 across:1285160k
  349. [   45.588293] EXT3 FS on sda1, internal journal
  350. [   47.268649] ip_tables: (C) 2000-2006 Netfilter Core Team
  351. [   47.649131] PPP generic driver version 2.4.2
  352. [   47.708292] NET: Registered protocol family 17
  353. [   47.785192] NET: Registered protocol family 10
  354. [   47.785569] lo: Disabled Privacy Extensions
  355. [   48.691451] No dock devices found.
  356. [   50.180519] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
  357. [   50.180527] apm: overridden by ACPI.
  358. [   50.328926] ppdev: user-space parallel port driver
  359. [   50.628666] audit(1231039472.611:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4918 profile="/usr/sbin/cupsd" namespace="default"
  360. [   52.240750] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
  361. [   55.019381] [drm] Initialized drm 1.1.0 20060810
  362. [   55.024620] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
  363. [   55.024634] PCI: Setting latency timer of device 0000:00:02.0 to 64
  364. [   55.024749] [drm] Initialized i915 1.6.0 20060119 on minor 0
  365. [   55.026448] [drm:i915_getparam] *ERROR* Unknown parameter 5
  366. [  100.236511] NET: Registered protocol family 24
  367. [ 2295.528687] usb 4-6: new high speed USB device using ehci_hcd and address 3
  368. [ 2295.666786] usb 4-6: configuration #1 chosen from 1 choice
复制代码
回复

使用道具 举报

发表于 2009-1-4 15:54:00 | 显示全部楼层
gphoto可以自己挂~~~~~~~~~~~~
回复 支持 反对

使用道具 举报

南燕
 楼主| 发表于 2009-1-4 21:46:50 | 显示全部楼层
自己识别到？那如果想像U盘那样使用呢？
回复 支持 反对

使用道具 举报

发表于 2009-1-6 11:45:42 | 显示全部楼层
seems this is encode of camera filesystem does't been recognized.
回复 支持 反对

使用道具 举报

南燕
 楼主| 发表于 2009-1-6 13:05:26 | 显示全部楼层
但是为什么lusb已经识别了呢?不知道问题出在哪里
回复 支持 反对

使用道具 举报

发表于 2009-1-7 11:02:47 | 显示全部楼层
should be the problem of encode. check your encode setup of /etc/fstab.
the line of mount usb, surely adding iocharset=utf8 or iocharset=cp936.
trying it out
回复 支持 反对

使用道具 举报

南燕
 楼主| 发表于 2009-1-7 18:32:49 | 显示全部楼层
Post by Dennis.Wang;1935146
should be the problem of encode. check your encode setup of /etc/fstab.
the line of mount usb, surely adding iocharset=utf8 or iocharset=cp936.
trying it out

应该不是吧，字符集只是说我看到的东西可能是乱码，但是是连U盘都看不到
回复 支持 反对

使用道具 举报

发表于 2009-1-7 23:54:16 | 显示全部楼层
使用Ubuntu, Xfce 4，然后接入数码相机，有提示检测到相机，问是否要导入图片，点击是后启动了f-spot，但是没有看到一张照片，相机里确实有照片的。

i dont know what you mean.
please try:
"ls /dev",pass this command to find out the usb disk.
then as root:
mount -t vfat -o umask=0,iocharset=utf8 /dev/sda4 /mnt/usb

modify sda4 and usb to yours
回复 支持 反对

使用道具 举报

南燕
 楼主| 发表于 2009-1-9 20:22:37 | 显示全部楼层
I could find new device, but it is char device instead of block device

Can't you speak in CN?
回复 支持 反对

使用道具 举报

发表于 2009-1-10 13:56:23 | 显示全部楼层
Post by 南燕;1936338
I could find new device, but it is char device instead of block device

Can't you speak in CN?


sorry. due to not understand you mean, i dont help you.
doesnt have chinese input method.
回复 支持 反对

使用道具 举报

返回列表 发新帖
高级模式
B Color Image Link Quote Code Smilies
您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表