fbterm启动就黑屏是怎么回事？

coocoffee · 发表于 2010-8-23 08:59:39

archlinux aur里安装的fbterm
已经设置好framebuffer:/grub/boot/menu.lst，启动参数加上vga=0x0318,1024*768,24色.显示器支持1440*900。
启动fbterm就黑屏，zhcon用得挺好，正常。

终端上网还是w3m好，中文支持做得不错，elinks还不能自动换行，看长篇左右拉得眼花。,

yafeng · 发表于 2010-8-23 09:29:21

兄弟……啥显卡？

coocoffee · 发表于 2010-8-23 12:01:36

Post by yafeng;2109372
兄弟……啥显卡？

sudo hwinfo --framebuffer

02: None 00.0: 11001 VESA Framebuffer
  [Created at bios.459]
  Unique ID: rdCR.bxwdvnTjx4E
  Hardware Class: framebuffer
  Model: "NVIDIA G72 Board - p381n18"
  Vendor: "NVIDIA Corporation"
  Device: "G72 Board - p381n18"
  SubVendor: "NVIDIA"
  SubDevice:
  Revision: "Chip Rev"
  Memory Size: 128 MB
  Memory Range: 0xe0000000-0xe7ffffff (rw)
  Mode 0x0300: 640x400 (+640), 8 bits
  Mode 0x0301: 640x480 (+640), 8 bits
  Mode 0x0303: 800x600 (+800), 8 bits
  Mode 0x0305: 1024x768 (+1024), 8 bits
  Mode 0x0307: 1280x1024 (+1280), 8 bits
  Mode 0x030e: 320x200 (+640), 16 bits
  Mode 0x030f: 320x200 (+1280), 24 bits
  Mode 0x0311: 640x480 (+1280), 16 bits
  Mode 0x0312: 640x480 (+2560), 24 bits
  Mode 0x0314: 800x600 (+1600), 16 bits
  Mode 0x0315: 800x600 (+3200), 24 bits
  Mode 0x0317: 1024x768 (+2048), 16 bits
  Mode 0x0318: 1024x768 (+4096), 24 bits
  Mode 0x031a: 1280x1024 (+2560), 16 bits
  Mode 0x031b: 1280x1024 (+5120), 24 bits
  Mode 0x0330: 320x200 (+320), 8 bits
  Mode 0x0331: 320x400 (+320), 8 bits
  Mode 0x0332: 320x400 (+640), 16 bits
  Mode 0x0333: 320x400 (+1280), 24 bits
  Mode 0x0334: 320x240 (+320), 8 bits
  Mode 0x0335: 320x240 (+640), 16 bits
  Mode 0x0336: 320x240 (+1280), 24 bits
  Mode 0x033d: 640x400 (+1280), 16 bits
  Mode 0x033e: 640x400 (+2560), 24 bits
  Mode 0x0345: 1600x1200 (+1600), 8 bits
  Mode 0x0346: 1600x1200 (+3200), 16 bits
  Mode 0x0347: 1400x1050 (+1400), 8 bits
  Mode 0x0348: 1400x1050 (+2800), 16 bits
  Mode 0x0352: 2048x1536 (+8192), 24 bits
  Config Status: cfg=new, avail=yes, need=no, active=unknown

yafeng · 发表于 2010-8-23 12:22:28

试试nouveau+kms？我的G92貌似木有问题

		自动登录	找回密码
密码			注册