关机几小时后再开机要重启几次才成功，请指教

garry

以前挺好，最近十几天机器多了个毛病，关机几小时后再开机要重启几次才成功
配置：升技V6＋赛扬1G＋G450显卡，XP+slackware,
XP启动到mup.sys后重启，和按RESET效果一样。
slackware没问题，登录-startx都行，但稍微移动鼠标，立即重启，折腾四五次后才行。
把网卡声卡去掉也不行
但成功后就没问题了。

windrose

估计是硬件的问题，把机箱拆开看看哪里松了，或者是不是太脏了

ganloo

Start the Recovery console or..
Start the computer with the boot disks or Windows CDROM
After the Welcome to Setup dialog box appears, press R to repair, and then press C to start Recovery console.

Choose install Windows and log on as Administrator.

At the command prompt type "disable Mup.sys"

"MUP stands for "Multiple UNC Provider" which assists Windows in locating resources when more than one redirector is on a machine such as "Microsoft Client for Microsoft Networks" and the "Novell Client for Novell Netware". When a connection to a server is requested it does not know if the request is to a Novell server or an NT server. It will start looking for the server with the primary protocol on the primary requestor and then continue looking for the server on each protocol bound to each redirector until the server is found."

Restart the computer and all should be well.

ganloo

The other suggestion:
1, Start up with recover mode,
2. Run chkdsk /r. Does it work. if not
3. Check up BIOS setting. Restore to safe mode
4. Have you had any new device installed, startup with the lease ammount of peripherials possible