HCF、HSF内置软猫安装配置！

pandonny

哈哈，用CONEXANT的HCF、HSF这两种型号猫猫的兄弟有救了，可以在linux下用了！
首先，先到http://www.mbsi.ca/cnxtlindrv/hsf/downloads.html下去下在对应你所使用linux的版本的驱动，然后安装！
rpm -ivh h*.rpm
然后运行配置工具！
/dev/modem设备文件的链接安装程序已经建好了，你只要用KDE的internet拨号程序拨号就一切OK了，哈哈小猫叫了！

free3

按你说的已经下载了modem的驱动,但不会装~请帮忙~
是Conexant HSF芯片的内猫,下载了一个RPM的驱动,官方网站提示选运行hsfconfig,结果就出现下面的了,呜呜~
[root@localhost root]# hsfconfig //我运行了..
Linux HSF softmodem drivers, version 4.06.06.02mbsibeta02040500
WARNING: this is an EXPERIMENTAL BETA VERSION of the HSF drivers for Linux.
USE AT YOUR OWN RISK! See the file /usr/lib/hsf/LICENSE for details.
Conexant Systems neither distributes nor maintains this package.
PLEASE DO NOT CONTACT CONEXANT REGARDING THIS SOFTWARE!!!
If you require assistance or need more inFORMation, go to:
http://www.mbsi.ca/cnxtlindrv
Pre-built HSF modules that seem compatible with your system were found under/usr/lib/hsf/modules/binaries/i586/RedHat-7.2/linux-2.4.7-10.
Would you like to use them? [yes] y //什么意思?我Y! <p>
ln: when making multiple links, last argument must be a directory
Assuming that a C compiler and proper kernel header files are present
on your system, we will now attempt to re-compile the modules.
Where is the directory of C header files that match your running kernel?[/usr/src/linux] //这里好像又要干什么的,我直接回车. <p>WARNING: missing file /usr/src/linux/include/linux/version.h
The cause of this problem is usually a missing or misconfigured
kernel source tree (and sometimes an incorrect directory or symbolic link).
First, ensure that the proper kernel source and compiler packages
from your distribution vendor and/or the community are installed.
The Linux kernel can then be reconfigured by running &quot;make menuconfig&quot;
under the kernel source directory (usually /usr/src/linux).
Verify that the proper options for your system are selected,
and that CONFIG_SMP (&quot;Symmetric multi-processing support&quot; under
&quotrocessor type and features&quot;) is disabled, as this driver is
presently designed to work on single-processor machines.
Then compile and install your new kernel (for more inFORMation about
this procedure, see the README file under the kernel source directory),
reboot the system using the new kernel, and re-run &quot;hsfconfig&quot;.
运行到这里就玩完了,,我也不知道该怎么办了,,高手帮一下忙啊~ <p>

pandonny

兄弟，你没有安装linux的源码软件包，到rh72的安装盘里把以下两个软件包装上：
kernel-headers-2.4.7-10.i386.rpm (第一张盘)
kernel-source-2.4.7-10.i386.rpm &nbsp;(第二张盘)
然后重新安装Modem的驱动然后配置一下，安装驱动之前最好先卸载一下驱动

bg6dt

我已经安装好了，可是还是不能用，我用kppp拨号时提示调谐解调器忙！我要怎么设置啊？

allen

呵呵，多谢pandonny的相救，我的猫猫终于可以跑了。

北南南北

最好我们的问题都能解决！这个帖子不错，还帮助弟兄！

北南南北

TO：老弟free3：
你的问题解决了吗？？？？
看来还得 pandonny 来解决了！不要急，只要是能在 allen 的机器上跑起来，你的猫也一定能跑！！！

北南南北

to:allen 弟，你能把猫成功安装的经验写出来吗，发到这里！因为我看到free3很急，他不能装上。我也为他着急！

free3

受不了了～，我已经把ＬＩＮＵＸ重装了，什么都装上了～，这次不少东西。
运行hsfconfig，出现一些硬件选项，有６个ＩＮＦ让我选，我选哪个ＭＯＤＥＭ都不好使，我决定放弃了～，我要去买一个硬猫！！

pandonny

兄弟，你先确定你猫的芯片是不是CONEXANT的HCF、HSF这两种型号。
我给的驱动下载链接是HSF型号的，HCF的要按左边的链接下载