NVIDIA显卡的新版驱动发布1.0-4363及安装方法

I-like

现在的症状是敲X的结果就是黑屏上出现的一个空心的X，就像刚开始装RH8出现的那个X一样。一直这样，没有变化，我又按Ctrl+Alt+BackSpace，显示器会提示说超过刷新率范围，74k/166Hz。显卡是GF4 MX420，显示器是飞利浦的107T。
请问这是怎么回事？！

flea

我现在的内核已经是编译过的。 怎样用自带的内核启动。

报错信息
modprobe : Can't locate module mvidia
Failed to install nvidia
error:  execution of %post scriptlet
from NVIDIA_kernel-1.0-4191.rh73up failed
exit status 1
为何重编译内核后会无法安装

seablue

最初由 flea 发表
我现在的内核已经是编译过的。 怎样用自带的内核启动。

报错信息
modprobe : Can't locate module mvidia
Failed to install nvidia
error:  execution of %post scriptlet
from NVIDIA_kernel-1.0-4191.rh73up failed
exit status 1
为何重编译内核后会无法安装

晕~~~
你编译前用的那个.

flea

编译前的那个被替换了，

hj_18

我用的是tl8w,微星出的GF4MX440,支持TV-OUT什么的,在安装1.0-4349的驱动后,能进X,都很正常,只是在退出X回到控制台时,发现字符模糊,扭动,而且行幅扩大,我用的显示器是PHILIPS107P4.后来我看到nvidia的网站上的论坛里有人介绍用nvtv这个软件来设置其中的tv-off按钮就能解决这个问题,昨天我试了,没有用.

flea

用源代码编译不知行不行

leyon

昨晚凌晨刷新了 epox 8rda+ 的 bios ，终于顺利安装了 4363 驱动，很爽，glxgear 有 67xx fps ，昨晚没下载到 et，今天继续下载，晚上回去就可以玩了。呵呵

还是要感谢 epox 的工程师的努力，发现问题会赶紧解决，喜欢！

I-like

还是进不了X桌面！怎么回事！？
我在驱动之家下载的NVIDIA-Linux-x86-1.0-4363.run，安装完后配的XF86Config文件如下：

# File generated by anaconda.

Section "ServerLayout"
Identifier "Anaconda Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Mouse1" "SendCoreEvents"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

FontPath "unix/:7100"

EndSection

Section "Module"
# Load "dbe"
Load "extmod"
Load "fbdevhw"
# Load "dri"
Load "glx"
Load "record"
Load "freetype"
# Load "type1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"

# Option "AutoRepeat" "500 5"

# when using XQUEUE, comment out the above line, and uncomment the
# following line
# Option "rotocol" "Xqueue"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
#Option "XkbVariant" ""
#Option "XkbOptions" ""
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "rotocol" "S/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection


Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "rotocol" "IMPS/2"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30.0-71.0
VertRefresh 50.0-160.0
Option "dpms"


EndSection

Section "Device"
# no known options
Identifier "NVIDIA GeForce 4 MX (generic)"
Driver "nvidia"
VendorName "NVIDIA GeForce 4 MX (generic)"
BoardName "NVIDIA GeForce 4 MX (generic)"

#BusID
EndSection

Section "Screen"
Identifier "Screen0"
Device "NVIDIA GeForce 4 MX (generic)"
Monitor "Monitor0"
DefaultDepth 24

Subsection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubsection

EndSection

Section "DRI"
Mode 0666
EndSection
有什么不对的吗？！

I-like

现在的症状是敲X的结果就是黑屏上出现的一个空心的X，就像刚开始装RH8出现的那个X一样。一直这样，没有变化，我又按Ctrl+Alt+BackSpace，显示器会提示说超过刷新率范围，74k/166Hz。显卡是GF4 MX420，显示器是飞利浦的107T。
请问这是怎么回事？！

superboy007_200

我也遇到过，你可以在SHELL下面敲Xconfig进入配置界面看看。