成功实现在linux 上使用 z-star usb 摄像头

Freesnake

还是Gentoo装驱动方便

wuzhifang

Post by ylfc2000
我的系统是redhat9.0 kernerl 2.4.20-8,是否必须是2.6内核?要是,我如何升级我的linux内核?
按照楼主的方法尝试了,make的时候出现如下错误,兄弟们帮我看看,谢谢了!
[root@ylfc spca5xx-20050419]# make
Compiling drivers/usb/spca5xx.c
In file included from /lib/modules/2.4.20-8/build/include/linux/vmalloc.h:8,
                 from drivers/usb/spca5xx.c:45:
/lib/modules/2.4.20-8/build/include/linux/highmem.h: In function `bh_kmap':
/lib/modules/2.4.20-8/build/include/linux/highmem.h:20: warning: pointer of type `void *' used in arithmetic
drivers/usb/spca5xx.c: In function `spca5xx_mmap':
drivers/usb/spca5xx.c:5392: warning: passing arg 1 of `remap_page_range_R2baf18f2' makes pointer from integer without a cast
drivers/usb/spca5xx.c:5392: incompatible type for argument 4 of `remap_page_range_R2baf18f2'
drivers/usb/spca5xx.c:5392: too few arguments to function `remap_page_range_R2baf18f2'
drivers/usb/spca5xx.c: At top level:
drivers/usb/spca5xx.c:5435: warning: initialization from incompatible pointer type
drivers/usb/spca5xx.c:8382: warning: initialization from incompatible pointer type
drivers/usb/spca5xx.c:8384: warning: initialization from incompatible pointer type
drivers/usb/spca5xx.c:8385: warning: initialization from incompatible pointer type
drivers/usb/spca5xx.c:8386: warning: braces around scalar initializer
drivers/usb/spca5xx.c:8386: warning: (near initialization for `spca5xx_driver.disconnect')
drivers/usb/spca5xx.c:8386: warning: excess elements in scalar initializer
drivers/usb/spca5xx.c:8386: warning: (near initialization for `spca5xx_driver.disconnect')
make: *** [drivers/usb/spca5xx.o] Error 1

请各位高手指教！！！十万火急！！！

mnznz001

我安装的时候，出现的错误
[root@localhost admini]# modprobe videodev
FATAL: Error inserting videodev (/lib/modules/2.6.11.10/kernel/drivers/media/video/videodev.ko): Input/output error
[root@localhost admini]# modprobe spca5xx
WARNING: Error inserting videodev (/lib/modules/2.6.11.10/kernel/drivers/media/video/videodev.ko): Input/output error

在/lib/modules/2.6.11.10/kernel/drivers/下都可以找到 这两个驱动程序，但就是出现加载错误。请教高手要如何处理呀？？？？
驱动版本是spca5xx-200500501

yh6788

成功啦，终于看见图像啦。

blackwolf

我用的是网眼3000的摄像头,ov511芯片,已经在内核中加入了对usb multimedia的支持,也加入了multimedia device的支持,用lsmod查看,发现ov511已经认出来了,但是用gnomemeeting和xawtv都不能看到摄像头画面,报错信息如下:
]# xawtv
This is xawtv-3.81, running on Linux/i686 (2.4.20-8)
can't open /dev/video0: No such device
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/video0: 没有那个设备
v4l2: open /dev/video0: 没有那个设备
v4l: open /dev/video0: 没有那个设备
no video grabber device available
我个人觉得是v4l模块有问题,然后在内核里加入了v4l,还是不行,请各位大侠指教!!!!
着急啊!!!
BTW:在重装linux以前用的好好的,不知道怎么重装后就不行了.

guyaokai

make
Compiling drivers/usb/spca5xx.c
In file included from /lib/modules/2.4.20-8/build/include/linux/vmalloc.h:8,
from drivers/usb/spca5xx.c:45:
/lib/modules/2.4.20-8/build/include/linux/highmem.h: In function `bh_kmap':
/lib/modules/2.4.20-8/build/include/linux/highmem.h:20: warning: pointer of type `void *' used in arithmetic
drivers/usb/spca5xx.c: In function `spca5xx_mmap':
drivers/usb/spca5xx.c:5392: warning: passing arg 1 of `remap_page_range_R2baf18f2' makes pointer from integer without a cast
drivers/usb/spca5xx.c:5392: incompatible type for argument 4 of `remap_page_range_R2baf18f2'
drivers/usb/spca5xx.c:5392: too few arguments to function `remap_page_range_R2baf18f2'
drivers/usb/spca5xx.c: At top level:
drivers/usb/spca5xx.c:5435: warning: initialization from incompatible pointer type
drivers/usb/spca5xx.c:8382: warning: initialization from incompatible pointer type
drivers/usb/spca5xx.c:8384: warning: initialization from incompatible pointer type
drivers/usb/spca5xx.c:8385: warning: initialization from incompatible pointer type
drivers/usb/spca5xx.c:8386: warning: braces around scalar initializer
drivers/usb/spca5xx.c:8386: warning: (near initialization for `spca5xx_driver.disconnect')
drivers/usb/spca5xx.c:8386: warning: excess elements in scalar initializer
drivers/usb/spca5xx.c:8386: warning: (near initialization for `spca5xx_driver.disconnect')
make: *** [drivers/usb/spca5xx.o] Error 1
我也遇到这样的问题，不知道该怎么解决？那位大虾帮帮我

yangjio4849

我用摄像头主要是网络聊天上的应用。但是目前我还不知道有一个Linux下的QQ或者MSN的客户端支持摄像头呢，因此我觉得没用。

tpc586

我编译没有什么问题，不过，所有的都安装完以后
#gqcam
/dev/video: No such device
然后就什么都没有了，结果是失败

ardin

一切都很完美，除了这个：

fztx

我用同样的方法，可以使用两款摄像头，中星微和一个杂牌，都是z-star芯片。
而且有一个msn软件可以视频聊天。只可惜没几天系统就挂了，现在也没心情搞这个了。。。