LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
查看: 951|回复: 13

nvsound 声卡无法驱动问题

[复制链接]
发表于 2005-6-2 13:04:14 | 显示全部楼层 |阅读模式
驱动NFORCES2 集成声卡需要加载那几个模块
 楼主| 发表于 2005-6-2 14:01:08 | 显示全部楼层

声卡无法驱动问题

NFORCES2  集成生卡装了NFORCE驱动     但声卡还是不能用  提示不能打开 /dev/sound/mixer
Your driver installation has been altered since it was initially
         installed; this may happen, for example, if you have since installed
         the NVIDIA driver through a mechanism other than the
         nforce-installer(such as rpm or with the NVIDIA tarballs).  The
         installer will attempt to uninstall as best it can.  Please see the
         file '/var/log/nvidia-nforce-installer.log' for details.
-> Uninstalling NVIDIA audio driver for Linux-x86 (1.0-2):
-> Deleting file /usr/share/doc/nforce//ReleaseNotes.html
-> Deleting file /usr/bin/nvmixer
-> Deleting file /usr/bin/nforce-installer
-> Deleting file /usr/bin/nforce-bug-report.sh
-> Deleting file /usr/local/lib/libnvopenal.a
-> Deleting file /usr/local/lib/libnvalut.a
-> Deleting file /lib/modules/2.6.10/kernel/sound/oss/nvsound.ko
-> Restoring file /usr/share/doc/nforce//ReleaseNotes.html
-> Restoring file /usr/bin/nforce-installer
-> Restoring file /usr/bin/nforce-bug-report.sh
-> done.
-> Uninstallation of existing driver: NVIDIA audio driver for Linux-x86 (1.0-2)
   is complete.
-> Installing 'NVIDIA audio driver for Linux-x86' (1.0-2):
   executing: '/sbin/depmod -aq'...
-> done.
-> Driver file installation is complete.
-> Running post-install sanity check:
-> done.
-> Sanity check passed.
-> Installation of the NVIDIA audio driver for Linux-x86 (version: 1.0-2) is
   now complete.  Please update your audio configuration as appropriate; see
   the file /usr/share/doc/nforce/ReleaseNotes.html for details.
nvidia-nforce-installer.log关于声卡部分
回复 支持 反对

使用道具 举报

发表于 2005-6-2 15:23:41 | 显示全部楼层
nvsound
回复 支持 反对

使用道具 举报

 楼主| 发表于 2005-6-2 18:47:34 | 显示全部楼层
用modprobe nvsound.ko提示找不到模块   模块在/lib/modules/2.6.10/kernel/sound/oss目录下
在modprobe.conf中加入alias sound-slot-0 nvsound.ko  ,reboot  点击调节声音显示无法打开/dev/sound/mixer  升级2.6内核后USB  驱动也无法加载  在2.4内核下都是正常的
可不可以把2.4的模块加载进2.6。。。。。
回复 支持 反对

使用道具 举报

发表于 2005-6-2 19:14:40 | 显示全部楼层
换用内核中的ALSA驱动吧。我也是这个芯片组的板子,官方网站下的声卡驱动,编译安装啥的都挺正常,就是没声,可能是设备文件的问题。再看看官方提供的是面临淘汰的OSS的驱动,就没兴趣深究下去了。用内核的驱动了事
回复 支持 反对

使用道具 举报

 楼主| 发表于 2005-6-2 22:59:08 | 显示全部楼层
ALSA 驱动 如何配置modprode.conf  装了ALSA     REBOOT后还是打不开/dev/sound/mixer的错误提示
不知道  can't open mixer  device  /dev/sound/mixer 是指什么问题
回复 支持 反对

使用道具 举报

发表于 2005-6-3 08:27:34 | 显示全部楼层
有些nForce2的板子声卡部份用的不是NV的,而是用的第三方的芯片。
我的ASUS K7N-8X用的是ALC650F(据说不是NV的,我也搞不清),在网上查了查,最后还是用ALSA解决了问题。楼主的好像和我的是一样的,建议去看看ALSA官方网站http://alsa-project.org/alsa-doc ... amp;module=intel8x0
回复 支持 反对

使用道具 举报

 楼主| 发表于 2005-6-3 12:34:06 | 显示全部楼层
2.4内核  只要加载i810-sudio驱动模块 就能驱动声卡 我想不是声卡驱动模块的事情吧
重新编译下内核 试试   2.4升级到2.6内核 有很多问题    USB  声卡都有问题    都要自己改动配置文件
回复 支持 反对

使用道具 举报

发表于 2005-6-3 16:34:02 | 显示全部楼层
好像有自动刷新模块依赖关系的软件,忘了是哪一个,一般是系统自带的
回复 支持 反对

使用道具 举报

发表于 2005-6-4 16:19:58 | 显示全部楼层
alsa的驱动有个配置工具的,好象叫 alsa-conf   alsa-util 之类,我自己编译的内核也是跑了这个工具自动配置了一下才好的
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表