Nvidia显卡出现如下错误，不能进X界面，求助！

xionghaijian

我装的系统是Fedora core 1，显卡是NVIDIA GeForce 4 MX440，显示器PHILIPS 107S5。下载NVIDIA的最新驱动，安装后，出现如下错误，不能自己解决，求助，谢谢！


[root@localhost /]# startx
Using authority file /root/.Xauthority
Writing authority file /root/.Xauthority
Using authority file /root/.Xauthority
Writing authority file /root/.Xauthority

XFree86 Version 4.3.0 (Fedora Core 1: 4.3.0-42)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.21-2.ELsmp i686 [ELF]
Build Date: 24 October 2003
Build Host: porky.devel.redhat.com

        Before reporting any problems, please make sure you are using the most
        recent XFree86 packages available from Red Hat by checking for updates
        at http://rhn.redhat.com/errata or by using the Red Hat Network up2date
        tool.  If you still encounter problems, please file bug reports in the
        XFree86.org bugzilla at http://bugs.xfree86.org and/or Red Hat
        bugzilla at http://bugzilla.redhat.com

Module Loader present
OS Kernel: Linux version 2.4.22-1.2115.nptlsmp (bhcompile@daffy.perf.redhat.com) (gcc version 3.2.3 20030422 (Red Hat Linux 3.2.3-6)) #1 SMP Wed Oct 29 15:30:09 EST 2003 P
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri Jun  3 16:18:33 2005
(EE) Unable to locate/open config file
(EE) Error from xf86HandleConfigFile()

Fatal server error:
no screens found

If you encounter a server crash, please report the problem by filing a bug
report in the XFree86.org bugzilla at http://bugs.xfree86.org and/or Red Hat
bugzilla at http://bugzilla.redhat.com/bugzilla.  When filing your report, it
is very important that you explain your problem in as much detail as possible,
and include a complete description on how to reproduce the problem.  After
submitting the bug report, attach the following files as uncompressed
individual file attachments using the bugzilla file attachment feature:
        - X server log file: /var/log/XFree86.0.log
        - Kernel log file: /var/log/messages


XIO:  fatal IO error 104 (Connection reset by peer) on X server ":0.0"
      after 0 requests (0 known processed) with 0 events remaining.
[root@localhost /]#

luoyong

(EE) Unable to locate/open config file
(EE) Error from xf86HandleConfigFile()

找不到配置文件

xionghaijian

请问正常情况下，他的配置文件是什么呢？
谢谢！

阿蟾

/etc/X11/XFree86.conf
装驱动后有没有改这东东？

xionghaijian

没有，发现在这个目录里根本就没有这个文件存在！因为我在安装系统的时候能够进入X界面，但不知为什么装好后就不能进去了！

阿蟾

哦，sorry,好象是/etc/XFree86.conf

以前用过一下FC1

xionghaijian

我从NVIDIA的配置范例中拷贝了一个文件，命名为/etc/X11/xorg.conf，再加上一个/etc/X11/XFree86.conf，再执行startx，还是出现上面贴出的错误。
我的配置文件/etc/X11/xorg.conf如下（内容和XFree86.conf完全一样）：

[root@localhost X11]# more xorg.conf
##########################################################################
# Sample XF86Config file for NVIDIA XFree86 drivers.
#
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
#
# Be sure to replace the monitor values with correct values for your
# monitor!
##########################################################################


Section "Files"

    RgbPath     "/usr/X11R6/lib/X11/rgb"
    FontPath   "unix/:-1"

EndSection


##########################################################################
# Server flags section.
##########################################################################

Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #NoTrapSignals

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #DontZap

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #DontZoom

    # This  allows  the  server  to start up even if the
    # mouse device can't be opened/initialised.
    AllowMouseOpenFail

EndSection


##########################################################################
# Input devices
##########################################################################

#
# Keyboard section
#
Section "InputDevice"

    Identifier "Keyboard1"
    Driver     "Keyboard"
    Option     "AutoRepeat"  "250 30"

    Option "XkbRules"  "xfree86"
    Option "XkbModel"  "pc105"
    Option "XkbLayout" "us"

EndSection


#
# Pointer section
#
Section "InputDevice"

    Identifier  "Mouse1"
    Driver      "mouse"
    Option      "rotocol"    "IMPS/2"
    Option      "Device"      "/dev/psaux"

EndSection


##########################################################################
# Module section
##########################################################################

Section "Module"

    Load        "dbe"

    # Load the glx module.
    Load        "glx"

    Load        "extmod"

    Load        "type1"
    Load        "freetype"
EndSection


##########################################################################
# Monitor section
##########################################################################

Section "Monitor"

    Identifier "MyMonitor"
    VendorName "Mitsubisi"
    ModelName  "Diamond Plus 120u"

    # be sure to replace these values with values appropriate for your
    # monitor!
    HorizSync  31-82
    VertRefresh 55-120

    # 3840x2400 @ 12Hz for IBM's T221 FlatPanel
    Modeline "3840x2400" 148.0 3840 3944 4328 4816 2400 2401 2404 2418

EndSection


##########################################################################
# Graphics device section(s)
##########################################################################

Section "Device"
    Identifier  "NV AGP"
    VendorName  "nvidia"
    Driver   "nvidia"
    # update this with the PCI id of your card.  Consult the output
    # of the 'lspci' command.  The BusID is usually optional when
    # only using one graphics card.
    BusID       "CI:1:0:0"
EndSection

Section "Device"
    Identifier "NV PCI"
    VendorName "nvidia"
    Driver "nvidia"
    # update this with the PCI id of your card.  Consult the output
    # of the 'lspci' command.  The BusID is usually optional when
    # only using one graphics card.
    BusID       "CI:0:13:0"
EndSection

Section "Device"
    Identifier "NV AGP TwinView"
    VendorName "nvidia"
    Driver "nvidia"
    # update this with the PCI id of your card.  Consult the output
    # of the 'lspci' command. The  BusID is usually optional when
    # only using one graphics card.
    BusID       "CI:1:0:0"

    # sample twinview setup
    Option "TwinView"
    # be sure to replace the HorizSync and VertRefresh with correct values
    # for your monitor!  
    Option "SecondMonitorHorizSync"   "31-82"
    Option "SecondMonitorVertRefresh" "55-120"
    Option "TwinViewOrientation"      "RightOf"
    Option "MetaModes"                "1280x1024,1280x1024; 1024x768,1024x768"
    Option "ConnectedMonitor"         "crt,crt"
EndSection


##########################################################################
# Screen sections
##########################################################################

#
# screen section for an nvidia AGP card
#
Section "Screen"
    Identifier "Screen AGP"
    Device      "NV AGP"
    Monitor     "MyMonitor"
    DefaultColorDepth 24
    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x400"
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
    EndSubsection

EndSection


#
# screen section for an nvidia PCI card
#
Section "Screen"
    Identifier "Screen PCI"
    Device      "NV PCI"
    Monitor     "MyMonitor"
    DefaultColorDepth 24
    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x400"
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
    EndSubsection
EndSection

#
# screen section for an nvidia AGP TwinView card
# (look at the appropriate Device section)
#
Section "Screen"
    Identifier "Screen AGP TwinView"
    Device "NV AGP TwinView"
    Monitor "MyMonitor"
    DefaultColorDepth 24
    Subsection "Display"
        Depth       8
        Modes       "1280x1024" "1024x768" "800x600" "640x400"
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1280x1024" "1024x768" "800x600" "640x480"
    EndSubsection
EndSection


##########################################################################
# ServerLayout sections
# (invoke using the '-layout' option of 'startx'.
##########################################################################

#
# just one agp card
#
Section "ServerLayout"
    Identifier  "AGP"
    Screen      "Screen AGP"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection

#
# just one pci card
#
Section "ServerLayout"
    Identifier  "CI"
    Screen      "Screen PCI"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection

#
# 2 cards, non twinview
#
Section "ServerLayout"
    Identifier  "Both"
    Screen      "Screen AGP"
    Screen      "Screen PCI" LeftOf "Screen AGP"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection

#
# just one agp twinview card
#
Section "ServerLayout"
    Identifier  "AGPTwinView"
    Screen      "Screen AGP TwinView"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection

#
# 2 cards, one agp twinview and one pci (3 monitors total)
#
Section "ServerLayout"
    Identifier  "BothTwinView"
    Screen      "Screen AGP TwinView"
    Screen      "Screen PCI" LeftOf "Screen AGP TwinView"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection
[root@localhost X11]#

北南南北

这个配置文件太乱了。不能从NV照抄

原来的配置文件呢？？

xionghaijian

原来的根本就没有，之前我用find / -name "xorg.conf"查找整个系统根本就没有这个文件！

北南南北

这样，先这样看一下，有没有类似的文件

[root@S01 beinan]#ls /etc/X11/

把这个内容帖出来。看有没有和xorg类似的。。比如  ：
[root@S01 beinan]#ls /etc/X11/xorg.conf*
/etc/X11/xorg.conf         /etc/X11/xorg.confBAK     /etc/X11/xorg.conf-vesa
/etc/X11/xorg.conf.backup  /etc/X11/xorg.conf-fbdev