LinuxSir.cn,穿越时空的Linuxsir!

 找回密码
 注册
搜索
热搜: shell linux mysql
查看: 1520|回复: 9

安装Intel855GME主板集成显卡出现这个问题怎么解决?

[复制链接]
发表于 2005-8-30 15:50:56 | 显示全部楼层 |阅读模式
我安装的记录

Welcome to the DRI Driver Installation Script
The package you downloaded is for the following driver:
Driver Name    : i915
Description    : Intel 830M/845G/852GM/855GM/865G/915G/915GM Driver
Architecture   : I386
Build Date     : 20041217
Kernel Module  : i915

Optional Information
Driver Version      :
Special Description :

Press ENTER to continue or CTRL-C to exit.

DIRECT RENDERING OPEN SOURCE PROJECT  -  DRIVER INSTALLATION SCRIPT

[ http://dri.sourceforge.net ]

==========================================================================

Select from the following options:

  1. Install driver (default)
  2. Uninstall driver

Enter reponse [1-2], or CTRL-C to exit
1


DIRECT RENDERING OPEN SOURCE PROJECT  -  DRIVER INSTALLATION SCRIPT

[ http://dri.sourceforge.net ]

==========================================================================

WARNING: YOUR X SERVER SEEMS TO BE RUNNING!

The script can not update your kernel modules while the X server is running.

You can do one of the following:

1. Log out of your X session now and then run this script.

2. Run the script now and restart your computer after the installation.
   If you exit your X session now you will not have to restart.

Press ENTER to continue or CTRL-C to exit.

DIRECT RENDERING OPEN SOURCE PROJECT  -  DRIVER INSTALLATION SCRIPT

[ http://dri.sourceforge.net ]

==========================================================================

The script will now compile the agpgart module and DRM kernel modules
for your machine.

Press ENTER to continue or CTRL-C to exit.


Compiling new agpgart module...

ERROR: AGPGART module did not compile - AGP module turned off in kernel ??

Compiling DRM module...

ERROR: Kernel modules did not compile

The DRI drivers can not be installed without the latest kernel modules.
Installation will be aborted. See the dri.log file for information on
what went wrong.
---------------------------------------------------------------
里边有个警告,说我没有退出X会话,这个X会话怎么关闭? 我在网上找了退出的命令(据说快捷键是alt+ctrl+backspace),结果我就退出了,要重新登录,我都是图形界面的.

我该怎么办呢?

之前我也尝试过编译内核,结果make 后,出现很多很多警告,make出现两个错误.如果继续编译内核后,我重启后,鼠标不能用了,没有声音了,启动日志出现很多错误!

55555555555555555555555555!
发表于 2005-8-30 17:44:23 | 显示全部楼层
make内核不是说着玩的,你英文要比较好,如果是第一次你要把每一项都看清了再选。(默认配置一定不行的)

这个错是说你要在字符界面是安装,按ctrl-alt-F1~F6进入字符界面(当然图形界面还得关)

你安这个驱动干嘛?
回复 支持 反对

使用道具 举报

发表于 2005-8-30 20:32:03 | 显示全部楼层
first, do not install the driver from official intel website...it's far too old!!!
you can not compile the driver module because that stupid driver only can be compiled with the kernel without agp_gart module, it's almost impossible to do it in this wat also you don't even need to do this

second, my suggestion is you can go to dri.freedesktop.org/snapshots download the fresh new drivers, pls download common and i915 packages
回复 支持 反对

使用道具 举报

 楼主| 发表于 2005-8-30 23:15:12 | 显示全部楼层
Post by stoneme
make内核不是说着玩的,你英文要比较好,如果是第一次你要把每一项都看清了再选。(默认配置一定不行的)

这个错是说你要在字符界面是安装,按ctrl-alt-F1~F6进入字符界面(当然图形界面还得关)

你安这个驱动干嘛?

作为新手我也不想编译内核,我编译一次,重装一次啊!
想编译内核,是因为看到精华贴上有个关于安装855GM驱动时候,高版本的内核和intel官方驱动不兼容.所以要下载低版本的内核编译,我编译一次完蛋一次!况且上边的提示中,说"内核模块"需要编译!

不知道为什么我进入桌面环境后,ctrl-alt-F1~F6就事黑屏啊!难道要等上好几分钟?

后来我是将启动时进入字符界面,安装时才没有警告X会话没有关的信息!

Thank you all the same!
回复 支持 反对

使用道具 举报

 楼主| 发表于 2005-8-30 23:22:00 | 显示全部楼层
Post by fallen
first, do not install the driver from official intel website...it's far too old!!!
you can not compile the driver module because that stupid driver only can be compiled with the kernel without agp_gart module, it's almost impossible to do it in this wat also you don't even need to do this

second, my suggestion is you can go to dri.freedesktop.org/snapshots download the fresh new drivers, pls download common and i915 packages


确实,官方的驱动程序是很老的,是2004年的.为什么高版本的内核不向下兼容呢?!!

编译这个内核确实出现N多警告和2个错误.

make menuconfig也是很多警告.

我去了您提供的这个网站: dri.freedesktop.org/snapshots,下载了2005年7月的驱动,不过我重启进入文本模式后,安装DRI没有问题,安装 AGPGAR还是那个错误,要我编译内核!

对我,要100%安装好Intel855驱动还真的不容易 :-(

谢谢您
回复 支持 反对

使用道具 举报

发表于 2005-8-30 23:39:20 | 显示全部楼层
不需要编译内核。。。谁说要编译内核来着?
先要安装common-xxxxxx
然后安装i915-xxxx
完全不需要编译内核,就是./install.sh完全傻瓜式安装,但是一定须要kenel-head...自己注意看readme
不看readme不是一个好习惯
回复 支持 反对

使用道具 举报

 楼主| 发表于 2005-8-31 02:01:13 | 显示全部楼层
出现提示这样的错误
Compiling new agpgart module...

ERROR: AGPGART module did not compile - AGP module turned off in kernel ??

Compiling DRM module...

ERROR: Kernel modules did not compile

可是这个问题如何解决呢?
Readme文件我事先看过,不过太泛了。对一些文件的说明非常简略的!
回复 支持 反对

使用道具 举报

发表于 2005-8-31 15:11:50 | 显示全部楼层
你怎么总是执迷不悟呢?
都叫你用dri的snapshots。。。。你为什么还要用官方的驱动呢?!!!!
dri的驱动不会编译agp_gart,只会编译drm和一个驱动文件
回复 支持 反对

使用道具 举报

发表于 2006-7-20 16:15:19 | 显示全部楼层
fallen
您好!
我的显卡是855GME,我准备用RH9.0
问题是:
     1.  是不是只要安装 common-xxxxxx i915-xxxx这两个文件
     2.  对于RH9.0 用那个版本比较合适 最新版对它是否支持
     3.  为什么要用i915  里面还有i810 以前我用过一些i8XX的网卡驱动  他们有什么区别
     
亟待回复
不胜感激!
回复 支持 反对

使用道具 举报

发表于 2006-7-28 15:15:52 | 显示全部楼层
i915-xxxx和内核版本的对应关系的说明在那?

楼上所说的Readme文件在那?/
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

快速回复 返回顶部 返回列表