关于GRUB还是没有搞定！都快没信心了

spritecat · 发表于 2003-3-7 16:44:23

vmware中如何设HD为IDE的？

dreamdreams · 发表于 2003-3-9 14:08:27

没在手边，不记得确切的了。你试试看添加硬盘，应该就在这一屏上有advance的选项，就可以设了。

lucida · 发表于 2003-3-9 14:35:55

开始的时候os type选other/dos之类，这样加出来的才是ide
否则就是scsi。。windows下的反正是这样

tram · 发表于 2003-3-9 15:45:22

我记得vmware的那个scsi控制器linux内核是支持的，你在vmware的帮助里看看它的scsi是什么芯片，然后在编译内核的scsi里面找到驱动，加上就可以了。以前我编译过的，只是记录文件已经找不到了。

tram · 发表于 2003-3-9 17:27:24

你的应该是BusLogic/Mylex SCSI adapters. BT-958
Configuring SCSI in a Guest Operating System

Mylex (the vendor of the SCSI bus adapter) provides documentation on how to install and configure the BT-958 adapter on its Web site at http://www.mylex.com/pub/manuals/bt9x8.pdf (the documentation you want is the MultiMaster BT/KT-958 Installation Guide and User Manual). This information should be followed for configuring the adapter in each guest operating system. Note that there are several flavors of BusLogic/Mylex SCSI adapters. The BT-958 is typically identified as a "

CI Multimaster." In addition, be aware that Workstation does not support the AutoSCSI utility that is normally included on each BT-958 device. In practice this is not important because the utility is used mostly to manage hardware-related configuration data.

		自动登录	找回密码
密码			注册