看看我这是错在什么地方？不能找到Root(请删了前面那个)

spritecat · 发表于 2003-3-9 13:58:05

启动后出的错；（

TecHunter · 发表于 2003-3-9 14:22:43

你的grub.conf写的有问题。就是root=后面的有问题。
还有你compile的kernel里面差一个选项吧...
VFS:Unable to Mount root fs...

cclnw · 发表于 2003-3-9 15:20:24

注意这行:
kmod: failed to exec /sbin/modprobe -s -k .......
你的scsi模块安装失败了

tram · 发表于 2003-3-9 17:27:52

你的应该是BusLogic/Mylex SCSI adapters. BT-958
Configuring SCSI in a Guest Operating System

Mylex (the vendor of the SCSI bus adapter) provides documentation on how to install and configure the BT-958 adapter on its Web site at http://www.mylex.com/pub/manuals/bt9x8.pdf (the documentation you want is the MultiMaster BT/KT-958 Installation Guide and User Manual). This information should be followed for configuring the adapter in each guest operating system. Note that there are several flavors of BusLogic/Mylex SCSI adapters. The BT-958 is typically identified as a "

CI Multimaster." In addition, be aware that Workstation does not support the AutoSCSI utility that is normally included on each BT-958 device. In practice this is not important because the utility is used mostly to manage hardware-related configuration data.

		自动登录	找回密码
密码			注册