debian etch 无法识别我的无线网卡

asmart

网卡是802.11b的PCMCIA卡， 朋友送我的， inventel 的 windows2k下识别正常 驱动正常安装 使用正常， windows下面识别为 broadcom 801.11b pcmcia 。
切换到debian下面时候 网卡仿佛不存在一样

dmseg里面也没有相关信息

lspci如下

1. 
   
2. \,,,/  [~]
   
3. (O_O)  [root@asmart]
   
4. (O)   [Thu Mar 15] | [22:27:59]
   
5.        # lspci
   
6. 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
   
7. 00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
   
8. 00:02.0 CardBus bridge: Texas Instruments PCI1251A
   
9. 00:02.1 CardBus bridge: Texas Instruments PCI1251A
   
10. 00:06.0 Multimedia audio controller: Cirrus Logic CS 4610/11 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
    
11. 00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
    
12. 00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
    
13. 00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
    
14. 00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
    
15. 01:00.0 VGA compatible controller: Neomagic Corporation NM2200 [MagicGraph 256AV] (rev 20)
    
16. 06:00.0 Ethernet controller: Xircom Cardbus Ethernet 10/100 (rev 03)
    
17. \,,,/  [~]
    
18. (O_O)  [root@asmart]
    
19. (O)   [Thu Mar 15] | [22:28:01]
    
20.        #
    

复制代码

只有我的有线网卡， 无法识别我的无线网卡....我记得即使无法驱动，似乎也应该识别出Ethernet controller的

dmesg

1. 
   
2. Linux version 2.6.18-0.2-686 (2.6.18-0.2-686-10.00.Custom) (root@asmart) (gcc ve
   
3. rsion 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Tue Mar 6 12:05:14 C
   
4. ST 2007
   
5. BIOS-provided physical RAM map:
   
6. BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
   
7. BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
   
8. BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
   
9. BIOS-e820: 0000000000100000 - 0000000011fd0000 (usable)
   
10. BIOS-e820: 0000000011fd0000 - 0000000011fdf000 (ACPI data)
    
11. BIOS-e820: 0000000011fdf000 - 0000000011fe0000 (ACPI NVS)
    
12. BIOS-e820: 0000000011fe0000 - 0000000012000000 (reserved)
    
13. BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
    
14. 0MB HIGHMEM available.
    
15. 287MB LOWMEM available.
    
16. On node 0 totalpages: 73680
    
17.   DMA zone: 4096 pages, LIFO batch:0
    
18.   Normal zone: 69584 pages, LIFO batch:15
    
19. DMI 2.2 present.
    
20. ACPI: RSDP (v000 IBM                                   ) @ 0x000fd6e0
    
21. ACPI: RSDT (v001 IBM    TP600R   0x00000001  0x00000000) @ 0x11fd0000
    
22. ACPI: FADT (v001 IBM    TP600R   0x00000001  0x00000000) @ 0x11fd0100
    
23. ACPI: DSDT (v001 IBM    TP600R   0x00000106 MSFT 0x0100000c) @ 0x00000000
    
24. ACPI: PM-Timer IO Port: 0xef08
    
25. Allocating PCI resources starting at 20000000 (gap: 12000000:edfe0000)
    
26. Detected 498.492 MHz processor.
    
27. Built 1 zonelists.  Total pages: 73680
    
28. Kernel command line: root=/dev/hda7 ro vga=791 irqpoll splash=slient
    
29. Misrouted IRQ fixup and polling support enabled
    
30. This may significantly impact system performance
    
31. Local APIC disabled by BIOS -- you can enable it with "lapic"
    
32. mapped APIC to ffffd000 (0124a000)
    
33. Enabling fast FPU save and restore... done.
    
34. Enabling unmasked SIMD FPU exception support... done.
    
35. Initializing CPU#0
    
36. PID hash table entries: 2048 (order: 11, 8192 bytes)
    
37. Console: colour dummy device 80x25
    
38. Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    
39. Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    
40. Memory: 283856k/294720k available (1821k kernel code, 10304k reserved, 639k data
    
41. , 208k init, 0k highmem)
    
42. Checking if this processor honours the WP bit even in supervisor mode... Ok.
    
43. Calibrating delay using timer specific routine.. 1003.81 BogoMIPS (lpj=2007621)
    
44. Security Framework v1.0.0 initialized
    
45. SELinux:  Disabled at boot.
    
46. Capability LSM initialized
    
47. Mount-cache hash table entries: 512
    
48. CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000
    
49. 00000000 00000000
    
50. CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 0
    
51. 0000000 00000000
    
52. CPU: L1 I cache: 16K, L1 D cache: 16K
    
53. CPU: L2 cache: 256K
    
54. CPU serial number disabled.
    
55. CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 0000000
    
56. 0 00000000
    
57. Intel machine check architecture supported.
    
58. Intel machine check reporting enabled on CPU#0.
    
59. Compat vDSO mapped to ffffe000.
    
60. Checking 'hlt' instruction... OK.
    
61. SMP alternatives: switching to UP code
    
62. Freeing SMP alternatives: 16k freed
    
63. ACPI: Core revision 20060707
    
64. ACPI: setting ELCR to 0200 (from 0800)
    
65. CPU0: Intel Pentium III (Coppermine) stepping 06
    
66. SMP motherboard not detected.
    
67. Local APIC not detected. Using dummy APIC emulation.
    
68. Brought up 1 CPUs
    
69. migration_cost=0
    
70. checking if image is initramfs... it is
    
71. Freeing initrd memory: 4561k freed
    
72. NET: Registered protocol family 16
    
73. ACPI: bus type pci registered
    
74. PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=7
    
75. PCI: Using configuration type 1
    
76. Setting up standard PCI resources
    
77. ACPI: Interpreter enabled
    
78. ACPI: Using PIC for interrupt routing
    
79. ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    
80. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    
81. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    
82. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    
83. ACPI: PCI Root Bridge [PCI0] (0000:00)
    
84. PCI: Probing PCI hardware (bus 00)
    
85. ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
    
86. * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
    
87. * this clock source is slow. Consider trying other clock sources
    
88. PCI quirk: region ef00-ef3f claimed by PIIX4 ACPI
    
89. PCI quirk: region efa0-efaf claimed by PIIX4 SMB
    
90. PIIX4 devres C PIO at 15e8-15ef
    
91. PIIX4 devres E PIO at 0538-053f
    
92. PIIX4 devres G PIO at 0130-013f
    
93. PIIX4 devres I PIO at 002e-002f
    
94. Boot video device is 0000:01:00.0
    
95. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    
96. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT]
    
97. ACPI: Power Resource [PSIO] (on)
    
98. ACPI: Embedded Controller [EC0] (gpe 9) interrupt mode.
    
99. ACPI: Power Resource [PFN0] (off)
    
100. ACPI: Power Resource [PVID] (on)
     
101. ACPI: Power Resource [PRSD] (off)
     
102. ACPI: Power Resource [PDCK] (on)
     
103. Linux Plug and Play Support v0.97 (c) Adam Belay
     
104. pnp: PnP ACPI init
     
105. pnp: PnP ACPI: found 18 devices
     
106. PnPBIOS: Disabled by ACPI PNP
     
107. PCI: Using ACPI for IRQ routing
     
108. PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
     
109. pnp: 00:0d: ioport range 0x15e0-0x15ef has been reserved
     
110. pnp: 00:0d: ioport range 0xef00-0xef3f could not be reserved
     
111. pnp: 00:0d: ioport range 0xefa0-0xefaf has been reserved
     
112. PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
     
113. PCI: Bridge: 0000:00:01.0
     
114.   IO window: d000-dfff
     
115.   MEM window: 70000000-dfffffff
     
116.   PREFETCH window: e0000000-f7ffffff
     
117. PCI: Bus 2, cardbus bridge: 0000:00:02.0
     
118.   IO window: 00001000-000010ff
     
119.   IO window: 00001400-000014ff
     
120.   PREFETCH window: 20000000-21ffffff
     
121.   MEM window: 22000000-23ffffff
     
122. PCI: Bus 6, cardbus bridge: 0000:00:02.1
     
123.   IO window: 00001800-000018ff
     
124.   IO window: 00001c00-00001cff
     
125.   PREFETCH window: 24000000-25ffffff
     
126.   MEM window: 26000000-27ffffff
     
127. ACPI: PCI Interrupt Link [LNKA] disabled and referenced, BIOS bug
     
128. ACPI: PCI Interrupt Link [LNKA] BIOS reported IRQ 0, using IRQ 9
     
129. ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
     
130. PCI: setting IRQ 9 as level-triggered
     
131. ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ
     
132. 9
     
133. ACPI: PCI Interrupt Link [LNKB] disabled and referenced, BIOS bug
     
134. ACPI: PCI Interrupt Link [LNKB] BIOS reported IRQ 0, using IRQ 9
     
135. ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
     
136. ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ
     
137. 9
     
138. NET: Registered protocol family 2
     
139. IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
     
140. TCP established hash table entries: 16384 (order: 5, 131072 bytes)
     
141. TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
     
142. TCP: Hash tables configured (established 16384 bind 8192)
     
143. TCP reno registered
     
144. audit: initializing netlink socket (disabled)
     
145. audit(1173995338.960:1): initialized
     
146. VFS: Disk quotas dquot_6.5.1
     
147. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
     
148. Initializing Cryptographic API
     
149. io scheduler noop registered
     
150. io scheduler anticipatory registered
     
151. io scheduler deadline registered
     
152. io scheduler cfq registered (default)
     
153. Limiting direct PCI/PCI transfers.
     
154. vesafb: framebuffer at 0xe0000000, mapped to 0xd2880000, using 2496k, total 2496
     
155. k
     
156. vesafb: mode is 1024x768x16, linelength=2048, pages=0
     
157. vesafb: protected mode interface info at c000:a6d0
     
158. vesafb: pmi: set display start = c00ca706, set palette = c00ca766
     
159. vesafb: scrolling: redraw
     
160. vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
     
161. Console: switching to colour frame buffer device 128x48
     
162. fb0: VESA VGA frame buffer device
     
163. isapnp: Scanning for PnP cards...
     
164. isapnp: No Plug & Play device found
     
165. Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
     
166. serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
     
167. pnp: Device 00:03 activated.
     
168. 00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
     
169. RAMDISK driver initialized: 16 RAM disks of 24768K size 1024 blocksize
     
170. PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:MOU0] at 0x60,0x64 irq 1,12
     
171. serio: i8042 AUX port at 0x60,0x64 irq 12
     
172. serio: i8042 KBD port at 0x60,0x64 irq 1
     
173. mice: PS/2 mouse device common for all mice
     
174. TCP bic registered
     
175. NET: Registered protocol family 1
     
176. NET: Registered protocol family 17
     
177. NET: Registered protocol family 8
     
178. NET: Registered protocol family 20
     
179. Using IPI No-Shortcut mode
     
180. Time: tsc clocksource has been installed.
     
181. ACPI: (supports S0 S1 S3 S4 S5)
     
182. Freeing unused kernel memory: 208k freed
     
183. input: AT Translated Set 2 keyboard as /class/input/input0
     
184. vga16fb: initializing
     
185. vga16fb: mapped to 0xc00a0000
     
186. fb1: VGA16 VGA frame buffer device
     
187. ACPI: Transitioning device [FN00] to D3
     
188. ACPI: Transitioning device [FN00] to D3
     
189. ACPI: Fan [FN00] (off)
     
190. ACPI: Transitioning device [FN20] to D3
     
191. ACPI: Transitioning device [FN20] to D3
     
192. ACPI: Fan [FN20] (off)
     
193. ACPI: Transitioning device [FN60] to D3
     
194. ACPI: Transitioning device [FN60] to D3
     
195. ACPI: Fan [FN60] (off)
     
196. ACPI: Transitioning device [FN70] to D3
     
197. ACPI: Transitioning device [FN70] to D3
     
198. ACPI: Fan [FN70] (off)
     
199. ACPI: CPU0 (power states: C1[C1] C2[C2])
     
200. ACPI: Processor [CPU0] (supports 8 throttling states)
     
201. Time: acpi_pm clocksource has been installed.
     
202. ACPI: Thermal Zone [THM0] (50 C)
     
203. ACPI: Thermal Zone [THM2] (32 C)
     
204. ACPI: Thermal Zone [THM6] (21 C)
     
205. ACPI: Thermal Zone [THM7] (27 C)
     
206. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
     
207. ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
     
208. PIIX4: IDE controller at PCI slot 0000:00:07.1
     
209. PIIX4: chipset revision 1
     
210. PIIX4: not 100% native mode: will probe irqs later
     
211.     ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hda:DMA, hdb:pio
     
212.     ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings: hdc:DMA, hdd:pio
     
213. Probing IDE interface ide0...
     
214. usbcore: registered new driver usbfs
     
215. usbcore: registered new driver hub
     
216. USB Universal Host Controller Interface driver v3.0
     
217. hda: SAMSUNG MP0201H, ATA DISK drive
     
218. ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
     
219. Probing IDE interface ide1...
     
220. hdc: TOSHIBA CD-ROM XM-1902B, ATAPI CD/DVD-ROM drive
     
221. ide1 at 0x170-0x177,0x376 on irq 15
     
222. ACPI: PCI Interrupt Link [LNKD] disabled and referenced, BIOS bug
     
223. ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 9
     
224. ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
     
225. ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ
     
226. 9
     
227. uhci_hcd 0000:00:07.2: UHCI Host Controller
     
228. uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
     
229. uhci_hcd 0000:00:07.2: irq 9, io base 0x00008400
     
230. usb usb1: configuration #1 chosen from 1 choice
     
231. hub 1-0:1.0: USB hub found
     
232. hub 1-0:1.0: 2 ports detected
     
233. hda: max request size: 512KiB
     
234. hda: 39179952 sectors (20060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(33)
     
235. hda: cache flushes supported
     
236. hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
     
237. hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
     
238. Uniform CD-ROM driver Revision: 3.20
     
239. Attempting manual resume
     
240. ReiserFS: hda7: found reiserfs format "3.6" with standard journal
     
241. ReiserFS: hda7: using ordered data mode
     
242. ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18,
     
243. max trans len 1024, max batch 900, max commit age 30, max trans age 30
     
244. ReiserFS: hda7: checking transaction log (hda7)
     
245. ReiserFS: hda7: Using r5 hash to sort names
     
246. Yenta: CardBus bridge found at 0000:00:02.0 [1014:00eb]
     
247. Yenta: Enabling burst memory read transactions
     
248. Yenta: Using CSCINT to route CSC interrupts to PCI
     
249. Yenta: Routing CardBus interrupts to PCI
     
250. Yenta TI: socket 0000:00:02.0, mfunc 0xfba97543, devctl 0x62
     
251. Linux agpgart interface v0.101 (c) Dave Jones
     
252. Yenta: ISA IRQ mask 0x0498, PCI irq 9
     
253. Socket status: 30000010
     
254. Yenta: CardBus bridge found at 0000:00:02.1 [1014:00eb]
     
255. Yenta: Using CSCINT to route CSC interrupts to PCI
     
256. Yenta: Routing CardBus interrupts to PCI
     
257. Yenta TI: socket 0000:00:02.1, mfunc 0xfba97543, devctl 0x62
     
258. Yenta: ISA IRQ mask 0x0498, PCI irq 9
     
259. Socket status: 30000020
     
260. agpgart: Detected an Intel 440BX Chipset.
     
261. agpgart: AGP aperture is 64M @ 0x40000000
     
262. input: PC Speaker as /class/input/input1
     
263. pccard: PCMCIA card inserted into slot 0
     
264. pccard: CardBus card inserted into slot 1
     
265. pci_hotplug: PCI Hot Plug PCI Core version: 0.5
     
266. shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
     
267. Floppy drive(s): fd0 is 1.44M
     
268. FDC 0 is a National Semiconductor PC87306
     
269. piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
     
270. piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your seri
     
271. al eeprom! Refusing to load module!
     
272. piix4_smbus: probe of 0000:00:07.3 failed with error -1
     
273. parport: PnPBIOS parport detected.
     
274. parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
     
275. irda_init()
     
276. NET: Registered protocol family 23
     
277. gameport: NS558 PnP Gameport is pnp00:08/gameport0, io 0x200, speed 745kHz
     
278. Real Time Clock Driver v1.12ac
     
279. IBM TrackPoint firmware: 0x0b, buttons: 3/3
     
280. input: TPPS/2 IBM TrackPoint as /class/input/input2
     
281. nsc_ircc_pnp_probe() : From PnP, found firbase 0x3F8 ; irq 4 ; dma 3.
     
282. nsc-ircc, chip->init
     
283. nsc-ircc, Found chip at base=0x02e
     
284. nsc-ircc, driver loaded (Dag Brattli)
     
285. nsc_ircc_open(), can't get iobase of 0x3f8
     
286. nsc-ircc, Found chip at base=0x02e
     
287. nsc-ircc, driver loaded (Dag Brattli)
     
288. nsc_ircc_open(), can't get iobase of 0x3f8
     
289. pnp: Device 00:05 disabled.
     
290. PCI: Enabling device 0000:06:00.0 (0000 -> 0003)
     
291. ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ
     
292. 9
     
293. PCI: Setting latency timer of device 0000:06:00.0 to 64
     
294. eth0: Xircom cardbus revision 3 at irq 9
     
295. cs: IO port probe 0x100-0x3af: excluding 0x130-0x137 0x220-0x22f 0x388-0x38f
     
296. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
     
297. cs: IO port probe 0x100-0x3af: excluding 0x130-0x137 0x220-0x22f 0x388-0x38f
     
298. cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
     
299. cs: IO port probe 0x820-0x8ff: clean.
     
300. cs: IO port probe 0xc00-0xcf7: clean.
     
301. cs: IO port probe 0xa00-0xaff: clean.
     
302. cs: IO port probe 0x820-0x8ff: clean.
     
303. cs: IO port probe 0xc00-0xcf7: clean.
     
304. cs: IO port probe 0xa00-0xaff: clean.
     
305. cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
     
306. cs: memory probe 0x60000000-0x60ffffff: clean.
     
307. pcmcia: registering new device pcmcia0.0
     
308. ts: Compaq touchscreen protocol output
     
309. Adding 393080k swap on /dev/hda8.  Priority:-1 extents:1 across:393080k
     
310. loop: loaded (max 8 devices)
     
311. ndiswrapper version 1.28 loaded (preempt=no,smp=yes)
     
312. usbcore: registered new driver ndiswrapper
     
313. ieee80211_crypt: registered algorithm 'NULL'
     
314. ieee80211: 802.11 data/management/control stack, git-1.1.13
     
315. ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
     
316. bcm43xx driver
     
317. device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
     
318. kjournald starting.  Commit interval 5 seconds
     
319. EXT3 FS on hda6, internal journal
     
320. EXT3-fs: mounted filesystem with ordered data mode.
     
321. ReiserFS: hda9: found reiserfs format "3.6" with standard journal
     
322. ReiserFS: hda9: using ordered data mode
     
323. ReiserFS: hda9: journal params: device hda9, size 8192, journal first block 18,
     
324. max trans len 1024, max batch 900, max commit age 30, max trans age 30
     
325. ReiserFS: hda9: checking transaction log (hda9)
     
326. ReiserFS: hda9: Using r5 hash to sort names
     
327. xircom cardbus adaptor found, registering as eth0, using irq 9
     
328. xircom_cb: Link status has changed
     
329. xircom_cb: Link is 100 mbit
     

复制代码

其中

1. ndiswrapper version 1.28 loaded (preempt=no,smp=yes)
   
2. usbcore: registered new driver ndiswrapper
   
3. ieee80211_crypt: registered algorithm 'NULL'
   
4. ieee80211: 802.11 data/management/control stack, git-1.1.13
   
5. ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
   
6. bcm43xx driver

复制代码

我安装了ndiswrapper 和 从我网卡windows驱动中提取的firmware 启动时候加载了
ndiswrapper和bcm43xx模块...
不过似乎没任何作用 因为发现不了硬件....

大家给我支个招

asmart

晕..N天没人甩我?

lpw

详细看看

1. lspci -v

复制代码

Ahdong

最新的内核（.20）才能支持显示出网卡，不过驱动起来勉强工作还要用你试的两种方法。

建议直接把这垃圾broadcom网卡扔垃圾箱里，真的，你解决这个问题的时间如果用来工作，可以买好几个网卡了。

timogen

同样的 我的无线网卡在debian下也无法运行 但是可以正常识别 netgear 511 v7不知何故

stchd

楼上的大侠，我的netgear wg511 v2怎么认不到？
能不能帮帮忙？