关于PROMISE EX8650驱动添加.

godhands

首先官方给出的方法是:Make a driver disk by copying all files listed in section 1 to a blank floppy diskette,
    and do the following steps:

    1) Start the Fedora Core installation by booting your system with the installation diskette or CD/DVD media.

    2) On "Welcome to Fedora 5" installation screen, a prompted label "boot:" will appear at the
       bottom of the screen, then type "linux dd acpi=off" (without quotation marks), and then press Enter.

    3) You will be asked "Do you have a driver disk?".  Select "Yes".

    4) When prompted "Insert your driver disk and press OK to continue",
       insert the driver diskette into the floppy drive and then select "OK".

    5) After above steps, continue with the OS installation as normal.

    6) At Fedora's "Congratulation, the installation is complete" screen with a "Reboot" button showed
       at the bottom right of the screen, press "Ctrl-Alt-F2" to logon a shell.

       Issue commands to load the driver at the # command prompt:
         # chroot /mnt/sysimage
         # mount /dev/fd0 /mnt
         # cd /mnt
         # ./install

       Note: If you happen to click the "Reboot" button at the "Congratulation, the installation is complete"
             screen WITHOUT performing those commands that are specified to run in the shell to load the driver,
             the system will fail to boot (kernel panic occurs due to /dev/root not found).
             If this occurs, you need to restart from step 1

    7) After the driver is loaded, press "Ctrl-Alt-F7" to go back to the installation screen,
       and then click "Reboot" button.

做到第6步需要先挂载USB软驱的时候.再/dev 下面没有软驱的设备....    而且SH 下FDISK 是无效的.    想请问如何挂载USB软驱.  cat/proc/scsi/scsi 可以看到软驱的.