Linux From Scratch 6.3 x86 r2160 LiveCD编译LFS系统后升级内核出现故障请指教

独孤不羁

　　系统硬件：
　　　　CPU:E2160
　　　　主板：盈通CI945GC
　　　　内存：2G
　　　　硬盘：320G  (SATA 口一) 80G（SATA 口三）　40G（移动硬盘，USB口）

　　用LIVECD自带的JHALFS编译LFS系统后，想使用个新的内容，于是将LIVECD上的LINUX内核复制到LFS下，启动LFS系统，然后编译2.6.28版本的内核，编译，重启后出现如下提示：
　　
Mounting kernel-based file systems: /proc /sys
Populating /dev with device nodes...
udevd-event[1501]:wait_for_sysfs:waiting for '/sysdevices/pci0000:00/0000:00:1f.1/host0/ioerr_cnt' failed
udevd-event[1502]:wait_for_sysfs:waiting for '/sysdevices/pci0000:00/0000:00:1f.1/host1/ioerr_cnt' failed
udevd-event[1503]:wait_for_sysfs:waiting for '/sysdevices/pci0000:00/0000:00:1f.2/host2/ioerr_cnt' failed
udevd-event[1504]:wait_for_sysfs:waiting for '/sysdevices/pci0000:00/0000:00:1f.2/host3/ioerr_cnt' failed
udevd-event[1505]:wait_for_sysfs:waiting for '/sysdevices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/host4/ioerr_cnt' failed
udevd-event[1706]:wait_for_sysfs:waiting for '/sysdevices/pci0000:00/0000:00:1f.1/host0/target0:0:0/ioerr_cnt' failed
udevd-event[1721]:wait_for_sysfs:waiting for '/sysdevices/pci0000:00/0000:00:1f.1/host0/target2:0:1/ioerr_cnt' failed
udevd-event[1720]:wait_for_sysfs:waiting for '/sysdevices/pci0000:00/0000:00:1f.1/host0/target2:0:0/ioerr_cnt' failed
udevd-event[1724]:wait_for_sysfs:waiting for '/sysdevices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/host4/target4:0:0/ioerr_cnt' failed
Activating all swap files/partitions...
Mounting root file system in read-only mode...
Checking file systems...
Could this be a zero-length partition?
FAILURE:

File system errors were encountered that could not be fixed automatically.This system cannot continue to boot and will therefore be halted until those errors are fixed manually by a System Administrator.

After you press Enter, this system will be halted and poweroff.

Press Enter to continue...

　　出现上述问题后，我又下载了2.6.29.4的内核进行编译，故障依旧，但用2.6.16.28的内核就不会出现该问题。
　　上述提示是在内核启动完成后，运行INIT2.86后出现的。将上述出现问题的内核及LFS系统接到一P4　SIS主板的机器（不支持SATA，845级别的主板）上却可正常启动，
　　
　　求大侠指教。

独孤不羁

看的人多，回复的人少，困扰了我三天的问题终于解决了，原因是FSTAB的问题：
　　　我在启动的时候在GRUB命令行设置的ROOT参数是根据内核识别硬盘的情况进行设置，但FSTAB的更改确没有跟上，修改FSTAB跟内核的ROOT参数一致，问题得到解决无法启动的问题，但：
　　Mounting kernel-based file systems: /proc /sys
Populating /dev with device nodes...
udevd-event[1501]:wait_for_sysfs:waiting for '/sysdevices/pci0000:00/0000:00:1f.1/host0/ioerr_cnt' failed
udevd-event[1502]:wait_for_sysfs:waiting for '/sysdevices/pci0000:00/0000:00:1f.1/host1/ioerr_cnt' failed
udevd-event[1503]:wait_for_sysfs:waiting for '/sysdevices/pci0000:00/0000:00:1f.2/host2/ioerr_cnt' failed
udevd-event[1504]:wait_for_sysfs:waiting for '/sysdevices/pci0000:00/0000:00:1f.2/host3/ioerr_cnt' failed
udevd-event[1505]:wait_for_sysfs:waiting for '/sysdevices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/host4/ioerr_cnt' failed
udevd-event[1706]:wait_for_sysfs:waiting for '/sysdevices/pci0000:00/0000:00:1f.1/host0/target0:0:0/ioerr_cnt' failed
udevd-event[1721]:wait_for_sysfs:waiting for '/sysdevices/pci0000:00/0000:00:1f.1/host0/target2:0:1/ioerr_cnt' failed
udevd-event[1720]:wait_for_sysfs:waiting for '/sysdevices/pci0000:00/0000:00:1f.1/host0/target2:0:0/ioerr_cnt' failed
udevd-event[1724]:wait_for_sysfs:waiting for '/sysdevices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/host4/target4:0:0/ioerr_cnt' failed

依然存在，请高手指教。

d00m3d

换个 udev 版本行不？