vesa 能用1366x768的分辨率吗？

gik · 发表于 2011-3-3 22:58:54

刚买了个新笔记本，ASUS U31KI46JG，INTEL i5的CPU带GPU，NVIDIA GT 415M的显卡。

可是现在我装上nvidia的驱动也用不了nv的显卡

我执行 X -configure会报错。

现在只能用vesa+intel i5 gpu勉强运行，但是分辨率只有1024x768，如果用vesa能有1366x768的分辨率也行啊。

NV的显卡反正现在对我也没什么太大作用，不用还省电。

X -configure 报错具体内容如下：

X.Org X Server 1.9.4
Release Date: 2011-02-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.37-ARCH i686
Current Operating System: Linux GKVM 2.6.37-ARCH #1 SMP PREEMPT Fri Feb 18 16:58:42 UTC 2011 i686
Kernel command line: root=/dev/disk/by-uuid/a7070f0c-9e5a-4774-a646-90ca93b042f0 ro vga=891
Build Date: 04 February 2011  09:39:45PM

Current version of pixman: 0.20.2
  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 27 03:49:12 2011
List of video drivers:
  nv
  nvidia
  vesa
(++) Using config file: "/root/xorg.conf.new"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(EE) NV: The PCI device 0x10de0dee ((null)) at 01@00:00:0 has a kernel module claiming it.
(EE) NV: This driver cannot operate until it has been unloaded.
Number of created screens does not match number of detected devices.
  Configuration failed.

如果用nvidia-xconfig的设置启动就会这样

X.Org X Server 1.9.4
Release Date: 2011-02-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.37-ARCH i686
Current Operating System: Linux GKVM 2.6.37-ARCH #1 SMP PREEMPT Fri Feb 25 09:07:57 UTC 2011 i686
Kernel command line: root=/dev/disk/by-uuid/a7070f0c-9e5a-4774-a646-90ca93b042f0 ro vga=891 3
Build Date: 04 February 2011  09:39:45PM

Current version of pixman: 0.20.2
  Before reporting problems, check http://wiki.x.org
  to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
  (++) from command line, (!!) notice, (II) informational,
  (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar  3 23:05:17 2011
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
(EE) No devices detected.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

philacorns · 发表于 2011-3-3 23:16:27

那应该用intel驱动吧

flay0303 · 发表于 2011-3-4 00:05:32

看来硬件太牛了也不行啊哈哈

gik · 发表于 2011-3-4 00:41:47

Post by philacorns;2129797
那应该用intel驱动吧

我也不知道intel这个显卡要用哪个驱动

hurricanek · 发表于 2011-3-4 03:12:39

你这个本是双显卡吧，linux对双显卡切换支援还不是很好

如果你想用n卡可能得进bios把显卡模式先设置成不可切换那种的。

现在nvidia检测不到的话多半是i卡，装xf86-video-intel。

gik · 发表于 2011-3-4 10:46:57

Post by hurricanek;2129816
你这个本是双显卡吧，linux对双显卡切换支援还不是很好

如果你想用n卡可能得进bios把显卡模式先设置成不可切换那种的。

现在nvidia检测不到的话多半是i卡，装xf86-video-intel。

我用intel的驱动的话比vesa还惨，分辨率只有640*480和800*600，

我还不知道怎么在BIOS关显卡呢。。。囧啊。。。回去再翻翻说明书看看，windows用得我好不爽。。

白开水隐士 · 发表于 2011-3-4 13:26:36

AUR上好像也有intel驱动的git版，编译试试把。毕竟是全开源的显卡驱动。

gik · 发表于 2011-3-5 14:06:37

Post by 白开水隐士;2129861
AUR上好像也有intel驱动的git版，编译试试把。毕竟是全开源的显卡驱动。

试了。。。结果一样，不知道是不跟我xorg.conf的配置有关。。。，分辨率最高始终只有800x600

philacorns · 发表于 2011-3-5 15:02:54

可以删了xorg.conf试试

gik · 发表于 2011-3-5 16:06:29

Post by philacorns;2130015
可以删了xorg.conf试试

删了就是vesa，分辨率还是1024x768

		自动登录	找回密码
密码			注册