|
我使用自己编译的2.6.0内核,在graphic console里下打开了framebuffer(y),
vesa vga(Y)及rivafb(Y)的支持,并且打上bootsplash for 2.6.0-test9补丁。
在字符界面下分辨率设置1024x768,启用了bootsplash。
不过每次从X里退回到字符界面下的时候,就会花屏,只能摸索着输入
命令。这个很奇怪,因为使用KNOPPIX光盘就不存在这个问题。
我尝试着强制使用rivafb,却似乎毫无作用:(
- title GNU/Linux 2.6.0
- root (hd0,1)
- kernel /boot/vmlinuz-2.6.0 video=riva:ywrap,mtrr vga=0x317 splash=verbose ro root=/dev/hda2
- initrd /boot/initrd.splash
复制代码
- bash-2.05b# cat /proc/fb
- 0 VESA VGA
复制代码
- bash-2.05b# cat /proc/splash
- Splash screen v3.1.3-2003/11/14 (0x07, 1024x768): on
复制代码
而编译内核时我又不能去掉vesa vga,因为bootsplash的缘故,编译会失败。
- bash-2.05b# fbset -i
- mode "1024x768-76"
- # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz
- geometry 1024 768 1024 768 16
- timings 12714 128 32 16 4 128 4
- rgba 5/11,6/5,5/0,0/0
- endmode
- Frame buffer device information:
- Name : VESA VGA
- Address : 0xe0000000
- Size : 8388608
- Type : PACKED PIXELS
- Visual : TRUECOLOR
- XPanStep : 0
- YPanStep : 0
- YWrapStep : 0
- LineLength : 2048
- Accelerator : No
复制代码
哪位大侠能给我点儿意见? 感谢感谢:)
mainboard: MSI K7N2G-ISLR Nforce2 Chipset
graphic card: Geforce2 MX onboard
soundcard, fireware, network-card all onboard
Monitor: Samtrom 19' 96BDF
Seagate 120G 7200 8M-cache |
|